The Use of Lean Six Sigma Methodology to Improve Efficiency in Waste Bank Operations and Its Contribution to The Circular Economy

Muhammad Syallaby, Septa Hardini

Abstract


Waste banks are innovative solutions in community-based waste management that support circular economy principles. However, many waste banks face various operational constraints such as process inefficiency, waste of resources, and low utilization of technology. This research aims to apply the Lean Six Sigma methodology  to improve the operational efficiency of waste banks and analyze its contribution to the circular economy. With the DMAIC (Define, Measure, Analyze, Improve, Control) approach, the study was conducted through field observations, interviews, and process efficiency analysis at waste banks in South Sumatra Province. The results show that Lean Six Sigma is able to identify points of waste and improve efficiency indicators such as process time, space utilization, and sorting quality. This efficiency has a positive impact on increasing the recycling volume and economic value of waste products. This study shows that Lean Six Sigma integration  supports the transition to a more sustainable waste management system.

 


Full Text:

PDF

References


V. Vaishnavi, “Assessment of readiness level for implementing lean six sigma in healthcare organization using fuzzy logic approach,” Int. J. Lean Six Sigma, vol. 12, no. 2, pp. 175–209, 2021, doi: 10.1108/IJLSS-07-2019-0081.

A. Shokri, “Green implementation of Lean Six Sigma projects in the manufacturing sector,” Int. J. Lean Six Sigma, vol. 11, no. 4, pp. 711–729, 2020, doi: 10.1108/IJLSS-12-2018-0138.

L. Gaikwad, “An integrated Lean, Green and Six Sigma strategies: A systematic literature review and directions for future research,” TQM J., vol. 32, no. 2, pp. 201–225, 2020, doi: 10.1108/TQM-08-2018-0114.

A. Farrukh, “Investigating the theoretical constructs of a green lean six sigma approach towards environmental sustainability: A systematic literature review and future directions,” Sustain., vol. 12, no. 19, 2020, doi: 10.3390/su12198247.

J. E. Sordan, “Contact points between Lean Six Sigma and Industry 4.0: a systematic review and conceptual framework,” 2022. doi: 10.1108/IJQRM-12-2020-0396.

R. Rathi, “Green Lean Six Sigma for improving manufacturing sustainability: Framework development and validation,” J. Clean. Prod., vol. 345, 2022, doi: 10.1016/j.jclepro.2022.131130.

V. Swarnakar, “Evaluating critical failure factors for implementing sustainable lean six sigma framework in manufacturing organization: A case experience,” Int. J. Lean Six Sigma, vol. 11, no. 6, pp. 1083–1118, 2020, doi: 10.1108/IJLSS-05-2019-0050.

G. Rejikumar, “Impact of data-driven decision-making in Lean Six Sigma: an empirical analysis,” Total Qual. Manag. Bus. Excell., vol. 31, no. 3, pp. 279–296, 2020, doi: 10.1080/14783363.2018.1426452.

V. Swarnakar, “Evaluating the effect of critical failure factors associated with sustainable Lean Six Sigma framework implementation in healthcare organization,” Int. J. Qual. Reliab. Manag., vol. 38, no. 5, pp. 1149–1177, 2021, doi: 10.1108/IJQRM-07-2020-0243.

L. B. M. Costa, “The effect of Lean Six Sigma practices on food industry performance: Implications of the Sector’s experience and typical characteristics,” Food Control, vol. 112, 2020, doi: 10.1016/j.foodcont.2020.107110.

M. S. Kaswan, “Green Lean Six Sigma sustainability – oriented project selection and implementation framework for manufacturing industry,” Int. J. Lean Six Sigma, vol. 14, no. 1, pp. 33–71, 2023, doi: 10.1108/IJLSS-12-2020-0212.

P. S. Parmar, “A systematic literature review on Sustainable Lean Six Sigma: Current status and future research directions,” 2020. doi: 10.1108/IJLSS-08-2018-0092.

L. B. M. Costa, “Lean six sigma in the food industry: Construct development and measurement validation,” Int. J. Prod. Econ., vol. 231, 2021, doi: 10.1016/j.ijpe.2020.107843.

V. Vaishnavi, “Modelling of readiness factors for the implementation of Lean Six Sigma in healthcare organizations,” Int. J. Lean Six Sigma, vol. 11, no. 4, pp. 597–633, 2020, doi: 10.1108/IJLSS-12-2017-0146.

M. Singh, “Analysis and prioritization of Lean Six Sigma enablers with environmental facets using best worst method: A case of Indian MSMEs,” J. Clean. Prod., vol. 279, 2021, doi: 10.1016/j.jclepro.2020.123592.

A. Belhadi, “A Big Data Analytics-driven Lean Six Sigma framework for enhanced green performance: a case study of chemical company,” Prod. Plan. Control, vol. 34, no. 9, pp. 767–790, 2023, doi: 10.1080/09537287.2021.1964868.

A. Kuiper, “A reconsideration of Lean Six Sigma in healthcare after the COVID-19 crisis,” Int. J. Lean Six Sigma, vol. 13, no. 1, pp. 101–117, 2022, doi: 10.1108/IJLSS-01-2021-0013.

R. Titmarsh, “Contributions of lean six sigma to sustainable manufacturing requirements: An industry 4.0 perspective,” 2020. doi: 10.1016/j.procir.2020.02.044.

E. A. Cudney, “Systematic review of Lean and Six Sigma approaches in higher education,” Total Qual. Manag. Bus. Excell., vol. 31, no. 3, pp. 231–244, 2020, doi: 10.1080/14783363.2017.1422977.

M. Sony, “Design of cyber physical system architecture for industry 4.0 through lean six sigma: conceptual foundations and research issues,” Prod. Manuf. Res., vol. 8, no. 1, pp. 158–181, 2020, doi: 10.1080/21693277.2020.1774814.

M. S. Kaswan, “Integrating Green Lean Six Sigma and industry 4.0: a conceptual framework,” J. Manuf. Technol. Manag., vol. 34, no. 1, pp. 87–121, 2023, doi: 10.1108/JMTM-03-2022-0115.

M. Singh, “Investigation and modeling of lean six sigma barriers in small and medium-sized industries using hybrid ISM-SEM approach,” Int. J. Lean Six Sigma, vol. 12, no. 6, pp. 1115–1145, 2021, doi: 10.1108/IJLSS-09-2020-0146.

S. M. Ali, “Barriers to lean six sigma implementation in the supply chain: An ISM model,” Comput. Ind. Eng., vol. 149, 2020, doi: 10.1016/j.cie.2020.106843.

H. Gholami, “The application of Green Lean Six Sigma,” Bus. Strateg. Environ., vol. 30, no. 4, pp. 1913–1931, 2021, doi: 10.1002/bse.2724.

Y. Ali, “Impact of Lean, Six Sigma and environmental sustainability on the performance of SMEs,” Int. J. Product. Perform. Manag., vol. 70, no. 8, pp. 2294–2318, 2021, doi: 10.1108/IJPPM-11-2019-0528.

M. S. Kaswan, “Exploration and Investigation of Green Lean Six Sigma Adoption Barriers for Manufacturing Sustainability,” IEEE Trans. Eng. Manag., vol. 70, no. 12, pp. 4079–4093, 2023, doi: 10.1109/TEM.2021.3108171.

M. S. Kaswan, “Green Lean Six Sigma for sustainable development: Integration and framework,” Environ. Impact Assess. Rev., vol. 83, 2020, doi: 10.1016/j.eiar.2020.106396.

B. Byrne, “Applying lean six sigma methodology to a pharmaceutical manufacturing facility: A case study,” Processes, vol. 9, no. 3, 2021, doi: 10.3390/pr9030550.

I. Daniyan, “Application of lean Six Sigma methodology using DMAIC approach for the improvement of bogie assembly process in the railcar industry,” Heliyon, vol. 8, no. 3, 2022, doi: 10.1016/j.heliyon.2022.e09043.

P. S. Parmar, “Evaluating Sustainable Lean Six Sigma enablers using fuzzy DEMATEL: A case of an Indian manufacturing organization,” J. Clean. Prod., vol. 265, 2020, doi: 10.1016/j.jclepro.2020.121802.

J. Antony, “The evolution and future of lean Six Sigma 4.0,” TQM J., vol. 35, no. 4, pp. 1030–1047, 2023, doi: 10.1108/TQM-04-2022-0135.

V. S. Bhat, “Simulation-based lean six sigma for Industry 4.0: an action research in the process industry,” Int. J. Qual. Reliab. Manag., vol. 38, no. 5, pp. 1215–1245, 2021, doi: 10.1108/IJQRM-05-2020-0167.

A. Scala, “Lean six sigma approach for reducing length of hospital stay for patients with femur fracture in a university hospital,” Int. J. Environ. Res. Public Health, vol. 18, no. 6, pp. 1–13, 2021, doi: 10.3390/ijerph18062843.

J. C. Sá, “A model of integration ISO 9001 with Lean six sigma and main benefits achieved,” Total Qual. Manag. Bus. Excell., vol. 33, no. 1, pp. 218–242, 2022, doi: 10.1080/14783363.2020.1829969.

A. S. Patel, “Critical review of literature on Lean Six Sigma methodology,” 2020. doi: 10.1108/IJLSS-04-2020-0043.

N. Yadav, “Impact of Industry4.0/ICTs, Lean Six Sigma and quality management systems on organisational performance,” TQM J., vol. 32, no. 4, pp. 815–835, 2020, doi: 10.1108/TQM-10-2019-0251.

F. T. A. Barbosa, R. S. Peruchi, S. N. Morioka, and P. Rotella Junior, “Lean, six sigma and sustainability case studies on supply chain management: a systematic literature review,” Rev. Gestão e Secr. (Management Adm. Prof. Rev., vol. 14, no. 9, pp. 15509–15536, 2023, doi: 10.7769/gesec.v14i9.2806.




DOI: http://dx.doi.org/10.24014/sitekin.v22i2.37387

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 SITEKIN: Jurnal Sains, Teknologi dan Industri



Editorial Address:
FAKULTAS SAINS DAN TEKNOLOGI
UIN SULTAN SYARIF KASIM RIAU
Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sitekin@uin-suska.ac.id
© 2023 SITEKIN, ISSN 2407-0939

SITEKIN Journal Indexing:

Google Scholar | Garuda | Moraref | IndexCopernicus | SINTA


Creative Commons License
SITEKIN by http://ejournal.uin-suska.ac.id/index.php