Designing the Layout of Fibreglass Production Facilities Using the ARC (Activity Relationship Chart) and ARD (Activity Relationship Diagram) Methods at PT. XYZ

Ari Andriyas Puji, Agus Mulyadi, M. Fajri Novrianto

Abstract


PT. XYZ is a plastic material and product manufacturing company founded in Riau in 1997. This company produces fibreglass (FRP) goods and accepts design requests according to consumer demand. In addition, PT. XYZ also has water tanks made of Polyethylene (HDPE) and stainless steel. In practice, some inefficiencies and inefficiencies make it difficult for operators to find tools such as grinders. This study uses the ARC (Activity Relationship Chart) and ARD (Activity Relationship Diagram) and redesigns the layout of the fibreglass production facility. The results of the study show changes and rotations in the 90º room operator, the transfer of measurements and cuts close to the base material mixture workstation located in the fibreglass production division room, and the addition of 4 workstations because it utilizes an empty floor.

 

Keywords: ARC, ARD, Fiberglass, Layout


Full Text:

PDF

References


Triyono, Cundara N, Irwan H. Usulan Perbaikan Tata Letak Fasilitas Perkantoran Di Pt. Bpr Mitra Arta Mulia Bengkalis Riau. Profesiensi 2014; 2: 165–175.

Siska M, Henriadi. Perancangan Ulang Tata Letak Fasilitas Pabrik Tahu Dan Penerapan Metode 5S. J Ilm Tek Ind 2012; 11: 144–153.

Winarno H. Analisis Tata letak Fasilitas Ruang Fakultas Teknik Universitas Serang Raya Dengan Menggunakan Metode Activity Relationship Chart (ARC). Dengan Menggunakan Metod Act Relationshipchart 2015; 2.

Nugraha RO. Analisis Perancangan Ulang Tata Letak Fasilitas Produksi Pabrik Lama Pada CV. Massitoh Catering Services. IPB University, 2012.

Heizer J, Render B, Munson C. Operation Management Sustainability and Supply Chain Management. 12th ed. England: Pearson Education, 2017.

Suhardi B, Juwita E, Astuti RD. Facility layout improvement in sewing department with Systematic Layout planning and ergonomics approach. Cogent Eng; 6. Epub ahead of print 1 January 2019. DOI: 10.1080/23311916.2019.1597412.

Anbumalar V, Mayandy R, Prasath KA, et al. Implementation of Cellular Manufacturing in Process Industry- A Case Study. Int J Innov Res Sci Eng Technol 2014; 3: 1144–1149.

Farook M, Krishnaiah. Productivity improvement in a spring manufacturing industry. Int J Recent Trends Mech Eng 2014; 2: 9–11.

Sutari O, U SR. Development of Plant Layout Using Systematic Layout Planning (SLP) To Maximize Production – A Case Study. 2014; 1–4.

Tak CS, Yadav ML. Improvement in Layout Design using SLP of a small size manufacturing unit: A case study. IOSR J Eng 2012; 2: 01–07.

Battini D, Faccio M, Persona A, et al. New methodological framework to improve productivity and ergonomics in assembly system design. Int J Ind Ergon 2011; 41: 30–42.

Kovács G, Kot S. Facility layout redesign for efficiency improvement and cost reduction. J Appl Math Comput Mech 2017; 16: 63–74.

Soerijayudha MW, Rahayu D. JURNAL REKAYASA dan OPTIMASI SISTEM INDUSTRI PERANCANGAN ULANG TATA LETAK FASILITAS PADA PT. KHARISMA PLASTIK INDO. J REKAYASA dan OPTIMASI Sist Ind 2021; 03: 32–39.

Pratiwi I, Etika M, Abdul Aqil W. Perancangan Tata Letak Fasilitas Di Insustri Tahu Menggunakan Blockplan. J Ilm Tek Ind Univ Muhamadiyah Surakarta 2015; 11: 102–112.

Faishol M, Hastuti S, Ulya M. PERANCANGAN ULANG TATA LETAK FASILITAS PRODUKSI PABRIK TAHU SRIKANDI JUNOK BANGKALAN. AGROINTEK; 7. Epub ahead of print 2013. DOI: https://doi.org/10.21107/agrointek.v7i2.2051.

Siregar RM, Sukatendel D, Tarigan U, et al. Perancangan Ulang Tata letak Fasilitas Produksi Dengan Menerapkan Algoritma Blocplan Dan Algoritma Corelap Pada Pt. Xyz. J Tek Ind USU 2013; 1: 35–44.

Triagus Setiyawan D, Hadlirotul Qudsiyyah D, Asmaul Mustaniroh S. Improvement of Production Facility Layout of Fried Soybean using BLOCPLAN and CORELAP Method (A Case Study in UKM MMM Gading Kulon, Malang). Ind J Teknol dan Manaj Agroindustri 2017; 6: 51–60.

Rosyidi MR. ANALISA TATA LETAK FASILITAS PRODUKSI DENGAN METODE ARC, ARD, DAN AAD DI PT. XYZ. WAKTU J Tek UNIPA 2018; 16: 82–95.

Putra AC, Muslimin M. Perencanaan Tata Letak untuk Meningkatkan Efisiensi Pada Perusahaan Furniture XYZ Dengan Metode ARC(Activity Relationship Chart) Dan ARD(Activity Relationship Diagram). J Ris Tek; 1.

Safitri ND, Ilmi Z, Kadafi MA. Analisis perancangan tataletak fasilitas produksi menggunakan metode activity relationship chart ( ARC ). J Manaj 2017; 9: 38–47.

Wahyukaton, Affifah G. Redesign of office layout using activity relationship chart (ARC) at the “X” department administration office of a “Y” university. IOP Conf Ser Mater Sci Eng 2019; 528: 012056.

Shewale PP, Shete MS, Sane SM. IMPROVEMENT IN PLANT LAYOUT USING SYSTEMATIC LAYOUT PLANNING (SLP) FOR INCREASED PRODUCTIVITY. Int J Adv Eng Res Stud 2012; 1: 259–261.

Wiyaratn W, Watanapa A. Improvement plant layout using systematic layout planning (SLP) for increased productivity. World Acad Sci Eng Technol 2010; 72: 373–377.

Zakirah T, Emeraldi R, Handi OM, et al. Warehouse layout and workflow designing at PT. PMS using systematic layout planning method. In: IOP Conference Series: Earth and Environmental Science, p. 012026.

Gozali L, Widodo L, Nasution SR, et al. Planning the New Factory Layout of PT Hartekprima Listrindo using Systematic Layout Planning (SLP) Method. In: IOP Conference Series: Materials Science and Engineering, p. 012001.

Bintang Bagaskara K, Gozali L, Widodo L. Redesign Layout Planning of Raw Material Area and Production Area Using Systematic Layout Planning (SLP) Methods (Case Study of CV Oto Boga Jaya). IOP Conf Ser Mater Sci Eng 2020; 852: 012122.

Ali Naqvi SA, Fahad M, Atir M, et al. Productivity improvement of a manufacturing facility using systematic layout planning. Cogent Eng 2016; 3: 1207296.

Suhardini D, Septiani W, Fauziah S. Design and Simulation Plant Layout Using Systematic Layout Planning. IOP Conf Ser Mater Sci Eng 2017; 277: 012051.

Hadiguna R, Setiawan H. Tata Letak Pabrik. Yogyakarta: Andi, 2008.

Kolo Q, Budiman A, Edy Tantowi A, et al. Eucalytus Oil Plant Layout Desain in Timor Tengah Utara Regency Using Activity Relationship Chart (ARC) Method. J Phys Conf Ser 2021; 1908: 012028.

Muther R. Systematic layout planning. Boston: Cahners Books, 1973.

Tompkins JA, White JA, Bozer YA, et al. Facilities Planning. 4th ed. California: john Wiley & Sons, 2010.

Devendra Sugandhi S, Bharule A. Fine Blanking Plant Layout Improvement Using Systematic Layout Planning. Int J Sci Eng Res 2016; 4: 1–4.

Apple JM. Plant Layout and Material Handling. John Wiley & Sons Ltd, 1997.




DOI: http://dx.doi.org/10.24014/sitekin.v20i2.20137

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Ari Andriyas Puji, Agus Mulyadi, M. Fajri Novrianto



Editorial Address:
FAKULTAS SAINS DAN TEKNOLOGI
UIN SULTAN SYARIF KASIM RIAU
Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sitekin@uin-suska.ac.id
© 2023 SITEKIN, ISSN 2407-0939

SITEKIN Journal Indexing:

Google Scholar | Garuda | Moraref | IndexCopernicus | SINTA


Creative Commons License
SITEKIN by http://ejournal.uin-suska.ac.id/index.php