Quality Control Model In The Sustainable Coconut Sugar Supply Chain (Case Study: SMEs In Indragiri Hilir District, Riau)

Siti Wardah; Feni Wulandari; Muhammad Amin

doi:10.24014/jti.v10i1.29642

Quality Control Model In The Sustainable Coconut Sugar Supply Chain (Case Study: SMEs In Indragiri Hilir District, Riau)

Siti Wardah, Feni Wulandari, Muhammad Amin

Abstract

Ant-sugar SMEs are developing in the Indragiri Hilir Regency. This industry uses the sap of hybrid coconut trees to make sugar. To maintain sustainability, SMEs require assistance with quality from upstream to downstream. Based on this, the research attempts to ascertain the mechanism of the sugar supply chain, identify the elements that lead to flaws, and suggest ways to enhance the chain's quality. Identify supply chain conditions using the Vorst method and identify the root causes of problems using the FTA method and quality improvement proposals based on evaluating potential failure levels using the FMEA method. The research results show that the supply chain members are Farmers, SMEs and Final Consumers. The factors causing defects in coconut sap water and ant sugar are human and environmental. The proposed improvement at the farmer level is that the cracked wood preservative must be measured correctly before taking coconut sap water. In contrast, at the SME level, workers pay attention to the ongoing production process and carry out periodic checks when boiling the sap water so that the maturity level is perfect and stir optimally so as not to cause failure. In the crystallization of ant sugar.

Full Text:

PDF

References

BPS-Statistics of Indragiri Hilir Regency, Indragiri Hilir Regency in Figures 2023, vol. 13, no. 1. 2023.

S. Wardah, Marimin, W. Sudarwati, and U. Marfuah, “Integration of scor and fuzzy ahp for location selection of edible white copra agro-industry integrasi scor dan fuzzy ahp untuk pemilihan lokasi agroindustri kopra putih konsumsi,” J. Teknol. Ind. Pertan., vol. 33, no. 3, pp. 216–227, 2023.

S. Wardah and A. Hilda, “Model Rantai Pasok Dan Nilai Tambah Gula Semut Kelapa (Studi Kasus: Kelompok Tani),” J. Teknol. Agro-Industri, vol. 9, no. 1, pp. 1–8, 2022, doi: 10.34128/jtai.v9i1.145.

B. Nurhadi, V. A. Maidannyk, M. Djali, E. Herlina Dwiyanti, N. Putrinda Editha, and M. Febrian, “Physical and functional properties of agglomerated coconut sugar powder and honey powder using polyvinylpyrrolidone as a binder,” Int. J. Food Prop., vol. 25, no. 1, pp. 93–104, 2022, doi: 10.1080/10942912.2021.2023177.

S. Wardah, N. Nurhasanah, and W. Sudarwati, “Integration models of demand forecasting and inventory control for coconut sugar using the ARIMA and EOQ modification methods,” J. Sist. dan Manaj. Ind., vol. 7, no. 2, pp. 127–138, 2023, doi: 10.30656/jsmi.v7i2.6500.

S. Wardah and M. Yani, “Spatial-based multicriteria decision-making model for coconut sugar agro-industry location selection: A case study at Indragiri Hilir District, Riau Province, Indonesia,” IOP Conf. Ser. Earth Environ. Sci., vol. 1063, no. 1, 2022, doi: 10.1088/1755-1315/1063/1/012041.

Suharyanto, R. L. Herlina, and A. Mulyana, “Analisis Pengendalian Kualitas Produk Waring Dengan Metode Seven Tools Di Cv. Kas Sumedang,” J. TEDC, vol. 16, no. 1, pp. 37–49, 2022.

R. Ratnadi and E. Suprianto, “Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk,” J. Indept, vol. 6, no. 2, p. 11, 2016, [Online]. Available: https://jurnal.unnur.ac.id/index.php/indept/article/view/178/0.

W. Ridwan, R. Widiastuti, and E. Nurhayati, “Analisis Pengendalian Kualitas Bibit Sawit Dengan Menggunakan Metode Fault Tree Analysis (FTA) dan Metode Failutre Mode Effect Analysis (FMEA) di PT. Kapuas Sawit Sejahtera,” Reslaj Relig. Educ. Soc. Laa Roiba J., vol. 5, no. 6, pp. 3730–3738, 2023, doi: 10.47467/reslaj.v5i6.2741.

S. Wardah, S. Suharto, and R. Lestari, “Analisis Pengendalian Kualitas Proses Produksi Produk Nata De Coco Dengan Metode Statistic Quality Control ( Sqc ),” JISI J. Integr. Sist. Ind., vol. 9, no. 2, p. 165, 2022, doi: 10.24853/jisi.9.2.165-175.

A. Wicaksono, E. Dhartikasari Priyana, and Y. Pandu Nugroho, “Analisis Pengendalian Kualitas Menggunakan Metode Failure Mode and Effects Analysis (FMEA) Pada Pompa Sentrifugal Di PT. X,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 9, no. 1, p. 177, 2023, doi: 10.24014/jti.v9i1.22233.

M. D. Pangestuti, M. Mukson, and A. Setiadi, “Analisis Rantai Pasok Pemasaran dan Nilai Tambah Gabah di Kecamatan Undaan Kabupaten Kudus,” J. Ekon. Pertan. dan Agribisnis, vol. 3, no. 4, pp. 671–680, 2019, doi: 10.21776/ub.jepa.2019.003.04.2.

J. Haekal, “Quality Control with Failure Mode and Effect Analysis (FMEA) And Fault Tree Analysis (FTA) Methods: Case Study Japanese Multinational Automotive Corporation,” Int. J. Sci. Adv., vol. 3, no. 2, pp. 227–234, 2022, doi: 10.51542/ijscia.v3i2.14.

M. Yazdi et al., “Fault tree analysis improvements: A bibliometric analysis and literature review,” Qual. Reliab. Eng. Int., vol. 39, no. 5, pp. 1639–1659, 2023, doi: 10.1002/qre.3271.

F. Ikwan, D. Sanders, and M. Hassan, “Safety evaluation of leak in a storage tank using fault tree analysis and risk matrix analysis,” J. Loss Prev. Process Ind., vol. 73, no. January, p. 104597, 2021, doi: 10.1016/j.jlp.2021.104597.

M. Kumar and M. Kaushik, “System failure probability evaluation using fault tree analysis and expert opinions in an intuitionistic fuzzy environment,” J. Loss Prev. Process Ind., vol. 67, p. 104236, 2020, doi: 10.1016/j.jlp.2020.104236.

A. Anwardi and Y. Pratama, “Perbaikan Efektivitas Pekerja Menggunakan Overall Labour Effectiveness dan Fault Tree Analysis Studi Kasus: PT. Riau Graindo Dumai,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 4, no. 1, p. 64, 2018, doi: 10.24014/jti.v4i1.5725.

A. N. Fuad and A. W. Risqi, “Critical Component Analysis Of Amc 36-800 / Ma An Shan Lathe Using Failure Mode And Effect Analysis And Fault Tree Analysis Methods,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 10, no. 1, pp. 27–34, 2024.

M. H. Aiman and M. Nuruddin, “Analisis Kecacatan Produk Pada Mesin Pemotongan Dengan Menggunakan Metode FMEA di UD. Abdi Rakyat,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 9, no. 2, p. 577, 2023, doi: 10.24014/jti.v9i2.23835.

C. Sriliasta Bangun, A. Maulana, R. Rasjidin, and T. Rahman, “Application of SPC and FMEA Methods to Reduce the Level of Hollow Product Defects,” J. Tek. Ind., vol. 8, no. 1, p. 2022, 2022.

I. A. Bayu Nirwana, A. W. Rizqi, and M. Jufryanto, “Implementasi Metode Failure Mode Effect and Analisys (FMEA) Pada Siklus Air PLTU,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, p. 110, 2022, doi: 10.24014/jti.v8i2.19369.

H. A. Yasin and R. P. Sari, “Pengembangan Sistem Inspeksi Digital Berbasis Macro VBA Excel Dengan Metode Failure Mode And Effects Analysis (FMEA) (Studi Kasus di PT. Meidoh Indonesia),” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 7, no. 1, p. 7, 2021, doi: 10.24014/jti.v7i1.11322.

E. Ungvári, I. G. Gyurika, and T. Csiszér, “Evaluation of the failure effects of a screwing station using a new approached FMEA,” MethodsX, vol. 11, no. July, pp. 1–9, 2023, doi: 10.1016/j.mex.2023.102278.

H. C. Wahyuni, M. A. Rosid, R. Azara, and A. Voak, “Blockchain technology design based on food safety and halal risk analysis in the beef supply chain with FMEA-FTA,” J. Eng. Res., no. December 2023, 2024, doi: 10.1016/j.jer.2024.02.002.

J. G. A. J. VAN DER VORST, “Performance measurement in agri-food supply-chain networks,” Quantifying Agri-Food supply Chain, pp. 15–26, 2006, doi: 10.1007/1-4020-4693-6_2.

S. Andiyanto, A. Sutrisno, and C. Punuhsingon, “Penerapan Metode FMEA (Failure Mode And Effect Analysis) Untuk Kuantifikasi Dan Pencegahan Resiko Akibat Terjadinya Lean Waste,” J. Online Poros Tek. Mesin, vol. 6, no. 1, pp. 45–57, 2017.

A. Anastasya and F. Yuamita, “Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. I, pp. 15–21, 2022, doi: 10.55826/tmit.v1ii.4.

G. Al Ghivaris, K. Soemadi, and A. Desrianty, “Usulan Perbaikan Kualitas Proses Produksi Rudder Tiller Di PT . Pindad Bandung,” vol. 03, no. 04, pp. 73–84, 2015.

N. D. Satmoko, H. Hersusetiyati, M. D. Priadi, and Y. Yuniarsih, “Manajemen Rantai Pasokan Pada Kegiatan Kewirausahaan Dan Inovasi Produk Sebagai Penentu Kinerja Ukm,” JISIP (Jurnal Ilmu Sos. dan Pendidikan), vol. 7, no. 1, pp. 383–388, 2023, doi: 10.58258/jisip.v7i1.4287.

DOI: http://dx.doi.org/10.24014/jti.v10i1.29642