Design of A Semi-Automatic Banana Chips Slicing Machine to Reduce Musculoskeletal Disorders (MSDS) In Workers

Carmelita Virry Clarissa Aprillova; Firman Ardiansyah Ekoanindyo

doi:10.24014/jti.v10i1.28383

Design of A Semi-Automatic Banana Chips Slicing Machine to Reduce Musculoskeletal Disorders (MSDS) In Workers

Carmelita Virry Clarissa Aprillova, Firman Ardiansyah Ekoanindyo

Abstract

This research aims to improve the banana chip-slicing process at Aneka Keripik Clarissa'N UMKM. The slicing is done manually, leading to workers' discomfort and Musculoskeletal Disorders (MSDs). To address this, we are designing a new machine based on the Nordic Body Map (NBM) questionnaire results. This machine, tailored using workers' anthropometric data, aims to be ergonomic, reducing fatigue and enhancing comfort and efficiency in the slicing process. The goal is simplifying and speeding up production while ensuring maximum worker well-being.

Keywords: Anthropometrics, MSDS, Nordic Body Map, Tool Design

Full Text:

PDF

References

A.Yohanes andF. A.Ekoanindyo, “Perancangan Mesin Pemotong Plastik Gulung Semi Otomatis Dengan Anthropometri,” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind., vol. 20, no. 2, p. 132, 2020, doi: 10.36275/stsp.v20i2.264.

Nurrohman andA.Yohanes, “Perancangan Alat Pengepresan Jenang Dengan Metode Antropometri Dan Ergonomi (Studi Kasus Di Ukm Agape Pemalang),” Din. Tek., vol. X, no. 2, pp. 9–17, 2017.

D.Rosyati andH.Ahyadi, “Mengurangi Keluhan Muskuloskeletal Dengan Metode Rapid Entire Body Assessment (REBA) Dan Pengukuran Anthropometri,” Bina Tek., vol. 15, no. 1, pp. 69–76, 2019.

W. T.Bhirawa, D. A. N.Hari, P.Studi, T.Industri, U. D.Marsekal, andA. D.Gerinda, “Perancangan Dudukan Mesin Gerinda Tangan Yang Ergonomis Dengan Menggunakan Metode Anthropometri,” J. Tek., vol. 11, no. 1, pp. 42–49, 2013, doi: 10.35968/jtin/v11i1/961.

B.Aprianto, A. F.Hidayatulloh, F. N.Zuchri, I.Seviana, andR.Amalia, “Faktor Risiko Penyebab Musculoskeletal Disorders (MSDs) Pada Pekerja: A Systematic Review,” J. Kesehat. Tambusai, vol. 2, no. 2, pp. 16–25, 2021, doi: 10.31004/jkt.v2i2.1767.

V. C. H.Chan, “The role of machine learning in the primary prevention of work-related musculoskeletal disorders: A scoping review,” Applied Ergonomics, vol. 98. 2022. doi: 10.1016/j.apergo.2021.103574.

W. K. d. S.Leite, “Risk factors for work-related musculoskeletal disorders among workers in the footwear industry: a cross-sectional study,” Int. J. Occup. Saf. Ergon., vol. 27, no. 2, pp. 393–409, 2021, doi: 10.1080/10803548.2019.1579966.

M. S.Denadai, “An ergonomics educational training program to prevent work-related musculoskeletal disorders to novice and experienced workers in the poultry processing industry: A quasi-experimental study,” Appl. Ergon., vol. 90, 2021, doi: 10.1016/j.apergo.2020.103234.

D.Das, “Risk factors associated with musculoskeletal disorders among gemstone polishers in Jaipur, India,” Int. J. Occup. Saf. Ergon., vol. 27, no. 1, pp. 95–105, 2021, doi: 10.1080/10803548.2018.1511102.

C. P.Ojukwu, “Prevalence, pattern and correlates of work-related musculoskeletal disorders among school teachers in Enugu, Nigeria,” Int. J. Occup. Saf. Ergon., vol. 27, no. 1, pp. 267–277, 2021, doi: 10.1080/10803548.2018.1495899.

F. A.Destian andE.Achiraeniwati, “Perancangan Fasilitas Kerja di Warehose dengan Metode Antropometri,” J. Ris. Tek. Ind., vol. 1, no. 2, pp. 154–163, 2022, doi: 10.29313/jrti.v1i2.486.

A.Tomia, M. L.Pattiapon, A. L.Kakerissa, P.Studi, T.Industri, andU.Pattimura, “Menggunakan Metode Antropometri,” vol. 3, no. 3, 2023.

Ii.Hayati, “Pengupasan Pisang Menggunakan Metode Antropometri Di Ikm Keripik Pisang Cipaku-Ciamis,” J. Mhs. Ind. Galuh, vol. 1, no. 1, pp. 147–152, 2020.

M. Z.Gasyanin, “The use of nordic body map and rapid upper limb assessment (RULA) methods in textile companies,” AIP Conference Proceedings, vol. 2882, no. 1. 2023. doi: 10.1063/5.0176487.

Y. P.Yusdystira, “Recommendations for work posture using nordic body maps and RULA methods,” AIP Conference Proceedings, vol. 2882, no. 1. 2023. doi: 10.1063/5.0176488.

O.Adiyanto, “Application of Nordic Body Map and Rapid Upper Limb Assessment for Assessing Work-related Musculoskeletal Disorders: A case study in Small and Medium Enterprises,” Int. J. Integr. Eng., vol. 14, no. 4, pp. 10–19, 2022, doi: 10.30880/ijie.2022.14.04.002.

N.Nelfiyanti, “Identification of Ergonomic Issues Among Malaysian Automotive Assembly Workers by Using the Nordic Body Map Method,” Lecture Notes in Mechanical Engineering, vol. 46. pp. 69–81, 2021. doi: 10.1007/978-981-15-9505-9_8.

F. A.Ekoanindiyo, A.Yohanes, andE.Prihastono, “Perancangan Mesin Pemipil Jagung Ramah Lingkungan Dengan Pendekatan Nordic Body Map,” J. Rekayasa Sist. Ind., vol. 6, no. 1, pp. 26–31, 2020, doi: 10.33884/jrsi.v6i1.1999.

A.Purbasari, “Analisis Postur Kerja Secara Ergonomi Pada Operator Pencetakan Pilar Yang Menimbulkan Risiko Musculoskeletal,” Sigma Tek., vol. 2, no. 2, p. 143, 2019, doi: 10.33373/sigma.v2i2.2064.

K. C.Mallampalli, “Work posture and risk factors associated with work-related musculoskeletal disorders among cashew workers in Eastern India,” Int. J. Hum. Factors Ergon., vol. 8, no. 1, pp. 44–63, 2021, doi: 10.1504/IJHFE.2021.115041.

A. S.Oestergaard, “Musculoskeletal disorders and perceived physical work demands among offshore wind industry technicians across different turbine sizes: A cross-sectional study,” Int. J. Ind. Ergon., vol. 88, 2022, doi: 10.1016/j.ergon.2022.103278.

A.Choobineh, “A multilayered ergonomic intervention program on reducing musculoskeletal disorders in an industrial complex: A dynamic participatory approach,” Int. J. Ind. Ergon., vol. 86, 2021, doi: 10.1016/j.ergon.2021.103221.

D. S. F. d.Souza, “Influence of risk factors associated with musculoskeletal disorders on an inner population of northeastern Brazil,” Int. J. Ind. Ergon., vol. 86, 2021, doi: 10.1016/j.ergon.2021.103198.

T. H.Suryatman andR.Ramdani, “Desain Kursi Santai Multifungsi Ergonomis Dengan Menggunakan Pendekatan Antropometri,” J. Ind. Manuf., vol. 4, no. 1, p. 45, 2019, doi: 10.31000/jim.v4i1.1244.

T.Pustaka, “Perancangan Alat Pemotong Nenas Yang Ergonomis Untuk Meningkatkan Produktivitas | Nofirza | Jurnal Ilmiah Teknik Industri,” 2009.

F. A.Ekoanindiyo, A.Yohanes, andR.Ernawati, “Perancangan Mesin Pembersih Usus Untuk Meningkatkan Produktivitas Di Ukm Kecamatan Bandar Kabupaten Batang,” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind., vol. 20, no. 2, p. 196, 2020, doi: 10.36275/stsp.v20i2.265.

T.Widodo, I.Ferdiansyah, andA.Prasetyo, “Perancangan Ulang Produk Os Table Dengan Menggunakan Metode Antropometri,” J. Ind. Manuf., vol. 6, no. 1, p. 57, 2021, doi: 10.31000/jim.v6i1.4118.

DOI: http://dx.doi.org/10.24014/jti.v10i1.28383