Analisis Efektifitas Kinerja Mesin Cutting Manual Dan Otomatis Menggunakan Metode OEE (Overall Equipment Effectiveness ) Di PT. XYZ

Nur Hidayatul Ummah; Said Salim Dahda

doi:10.24014/jti.v8i2.19765

Analisis Efektifitas Kinerja Mesin Cutting Manual Dan Otomatis Menggunakan Metode OEE (Overall Equipment Effectiveness ) Di PT. XYZ

Nur Hidayatul Ummah, Said Salim Dahda

Abstract

Competition in the manufacturing industry is currently getting tougher due to rapid developments from time to time. The use of tools or machines as a supporting factor for the operation is something that cannot be separated in the industrial world. Therefore, engine performance is a factor that must be considered. Over time, machine performance will decline due to age, maintenance and minimal experience of human resources. In improving performance (effectiveness) to obtain productivity, researchers can calculate the level of performance effectiveness of manual and automatic (CNC) cutting machines. By measuring using the OEE (Overall Equipment Effectiveness) method. The steps in measuring the OEE method are carried out by taking into account Availability (A), Performance Efficiency (P) and Product Quality (R). Based on the advantages of OEE, further analysis of the calculation of Six big losses is carried out. Where the Overall Equipment Effectiveness (OEE) value of the Cutting Automatice (CNC) machine is 73.24% while the manual cutting machine is 55.32%. Both machines have not met the ideal OEE performance value of 85%. While the results of the calculation of Six big losses obtained a large value and affect the effectiveness of the two machines to be minimized is the Breakdown loss factor, Setup and Adjustment Loss and Defect Loss Process. So that continuous and periodic improvements are needed to maintain the effectiveness of both machines and increase productivity.

Keywords : Machine performance, Overall Equipment Effectiveness (OEE), Six Big Losses, productivity and automatic (CNC) and manual cutting machines.

Full Text:

PDF

References

H. Hidayat, M. Jufriyanto, and A. W. Rizqi, “Analisis Overall Equipment Effectiveness (Oee) Pada Mesin Cnc Cutting,” Rotor, vol. 13, no. 2, p. 61, 2020, doi: 10.19184/rotor.v13i2.20674.

K. Amilia, S. S. Dahda, and E. Ismiyah, “Analisis Kinerja Fasilitas Produksi Dioctyle Phtalate Dan Diisononyl Phthalate Dengan Menggunakan Metode Overall Equipment Effectiveness DI PT. Petronika,” JUSTI (Jurnal Sist. dan Tek. Ind., vol. 1, no. 2, pp. 164–186, 2021.

H. Fauzi, J. Alhilman, and F. T. Atmaji, “Analisis Penerapan Overall Equipment Effectiveness (Oee) Dan Overall Resource Effectiveness (Ore) Dalam Mengevaluasi Efektivitas Mesin Cnc Millac Di Pt Dirgantara Indonesia,” e-Proceeding Eng., vol. 8, no. 2, pp. 2107–2114, 2021.

H. Ariyah, “Penerapan Metode Overall Equipment Effectiveness ( OEE ) Dalam Peningkatan Efisiensi Mesin Batching Plant ( Studi Kasus : PT . Lutvindo Wijaya Perkasa ),” J. Teknol. Dan Manaj. Ind. Terap., vol. 1, no. Ii, pp. 70–77, 2022.

M. U. Mukasafah and B. A. Hasyim, “Analisis Efektivitas Mesin Produksi Filter Rokok Ks02 Menggunakan Metode Overall Equipment Effectiveness ( OEE ) DI PT . Essentra Indonesia Muhimatul Ulya Mukasafah Budihardjo Achmadi Hasyim Abstrak,” J. Pendidik. Tek. Mesin, vol. 07, pp. 50–58, 2018.

N. R. Nurwulan and D. K. Fikri, “Analisis Produktivitas dengan Metode OEE dan Six Big Losses: Studi Kasus di Tambang Batu Bara,” J. IKRA-ITH Ekon., vol. 3, no. 3, pp. 30–35, 2020.

S. Nakajima, “Introduction to TPM.” pp. 1–158, 1988.

M. J. Syaputra, U. Utomo, and E. Rimawan, “Analisa Kinerja Mesin Kemas Primer, Dengan Metode Overall Equipment Effectiveness (Oee) Di Sebuah Industri Farmasi,” J. Ind. Serv., vol. 5, no. 2, pp. 143–146, 2020, doi: 10.36055/jiss.v5i2.8003.

V. I. Lestari and J. A. Suryadi, “Analisis Efektivitas Mesin Pada Stasiun Ketel Dengan Menggunakan Metode Overall Equipment Effectiveness (Oee) Di Pt. Xyz,” Tekmapro J. Ind. Eng. Manag., vol. 16, no. 2, pp. 36–47, 2021, doi: 10.33005/tekmapro.v16i2.240.

A. Nuryono, “Analisis Efektifitas Kinerja Excavator Pada Aktifitas Ob Removal Penambangan Batubara Menggunakan Metode OEE,” J. Ind. Manuf., vol. 3, no. 2, pp. 79–88, 2018.

A. E. Susetyo, “Analisis Overall Equipment Effectivenes (Oee) Untuk Menentukan Efektifitas Mesin Sonna Web,” Sci. Tech J. Ilmu Pengetah. dan Teknol., vol. 3, no. 2, pp. 93–102, 2017, doi: 10.30738/jst.v3i2.1622.

Y. B. Ismaya and S. Suseno, “Analisis Pengendalian Bahan Baku Ubi Jalar Jalar Menggunakan Metode Economic Order Quantity (EOQ) Dan H-Sin Rau PT. Galih Estetika Indonesia,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. II, pp. 123–130, 2022.

D. Dewianawati, M. Efendi, and S. R. Oksaputri, “Pengaruh Kecerdasan Emosional, Kompetensi, Komunikasi dan Displin Kerja Terhadap Kineja Karyawan,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. III, pp. 223–230, 2022.

L. M. Ramdani and A. Z. Al Faritsy, “Analisis Pengendalian Kualitas Pada Produksi Base Plate R-54 Menggunakan Metode Statistical Quality Control Dan 5S,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. II, pp. 85–97, 2022.

H. Ariyah, “Penerapan Metode Overall Equipment Effectiveness (OEE) Dalam Peningkatan Efisiensi Mesin Batching Plant (Studi Kasus: PT. Lutvindo Wijaya Perkasa),” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. II, pp. 70–77, 2022.

A. Wahid, “Penerapan Total Productive Maintenance (TPM) Produksi Dengan Metode Overall Equipment Effectiveness (OEE) Pada Proses Produksi Botol (PT. XY Pandaan – Pasuruan),” J. Teknol. Dan Manaj. Ind., vol. 6, no. 1, pp. 12–16, 2020, doi: 10.36040/jtmi.v6i1.2624.

O. Rabiatussyifa, F. N. Azizah, and A. D. Ardhani, “Analisis Produktivitas Mesin Buffing Menggunakan Metode Overall Equipment Effectiveness (OEE) Di PT. XYZ Cikarang, Jawa Barat,” J. Ilm. Wahana Pendidik., vol. 8, no. 3, pp. 95–102, 2022, doi: 10.5281/zenodo.6301691.

S. D. Cahyono and N. Budiharti, “Implementasi Total Productive Maintenance Pada Mesin Press Dryer Di Pt. Tri Tunggal Laksana,” Ind. Inov. J. Tek. Ind., vol. 10, no. 2, pp. 75–81, 2020, doi: 10.36040/industri.v10i2.2827.

K. Hafiz and E. Martianis, “Analisis Overall Equipment Effectiveness (OEE) pada Mesin Caterpillar Type 3512B,” SINTEK J. J. Ilm. Tek. Mesin, vol. 13, no. 2, p. 87, 2019, doi: 10.24853/sintek.13.2.87-96.

L. R. Sari, “E -ISSN : 2746-0835 Volume 2 No 3 ( 2021 ) JUSTI ( Jurnal Sistem Dan Teknik Industri ) Analisis Efektivitas Fasilitas Produksi Jerigen Menggunakan Metode Overall Equipment Effectiveness Program Studi Teknik Industri , Fakultas Teknik , Universitas Muhamma,” vol. 2, no. 3, pp. 354–361, 2021.

G. Kurniawati, H. Putri, R. D. Astuti, and B. Suhardi, “Perhitungan Tingkat Efektivitas Mesin Tsudakoma dengan Menggunakan Metode Overall Equipment Effectiveness ( OEE ) ( Study kasus PT . XYZ ),” Semin. Nas. Tek. Ind. Univ. Gadjah Mada 2017, no. November, pp. 50–59, 2017.

L. U. Maknunah, F. Achmadi, and R. Astuti, “Penerapan Overall Equipment Effectiveness (Oee) Untuk Mengevaluasi Kinerja Mesin-Mesin Di Stasiun Giling Pabrik Gula Krebet Ii Malang,” J. Agroindustrial Technol., vol. 26, no. 2, pp. 189–198, 2017.

S. Nallusamy, V. Kumar, V. Yadav, U. K. Prasad, and S. K. Suman, “Implementation of total productive maintenance to enhance the overall equipment effectiveness in medium scale industries,” Int. J. Mech. Prod. Eng. Res. Dev., vol. 8, no. 1, pp. 1027–1038, 2018, doi: 10.24247/ijmperdfeb2018123.

P. Muchiri and L. Pintelon, “Performance measurement using overall equipment effectiveness (OEE): Literature review and practical application discussion,” Int. J. Prod. Res., vol. 46, no. 13, pp. 3517–3535, 2008, doi: 10.1080/00207540601142645.

H. Adiyatna, “Pengukuran Efektivitas Mesin Molding Menggunakan Pendekatan Nilai Overall Equipment Effectiveness ( OEE ) DI PT XYZ Pengukuran Efektivitas Mesin Molding Menggunakan Pendekatan Nilai Overall Equipment Effectiveness ( Oee ) Di Pt Xyz,” vol. XVIII, pp. 58–73, 2021.

M. D. Susanto, D. Andesta, and M. Jufriyanto, “Analisis Efektivitas Mesin Injection Moulding Menggunakan Metode OEE dan FMEA (Studi Kasus di PT. Cahaya Bintang Plastindo),” JUSTI (Jurnal Sist. dan Tek. Ind., vol. 2, no. 3, p. 411, 2022, doi: 10.30587/justicb.v2i3.3685.

C. Bakti and H. Kartika, “Perawatan Mesin Dengan Metode Overall Equipment Effectiveness ( Oee ),” J. Ilmu Tek. dan Komput., vol. 3, no. 1, pp. 31–38, 2019.

DOI: http://dx.doi.org/10.24014/jti.v8i2.19765