.png)
Email this article The Use of Virtual Stream Mapping in Business Process Re-Engineering for Order Fulfillment Improvement at PT. X
Abstract
MSMEs in the manufacturing sector often face challenges in the efficiency of the production process, especially when implementing a make-to-order system that leads to high product variety and long lead times. This research aims to design improvements in the production process at PT. X, a furniture MSME in Bandung, by applying the Value Stream Mapping (VSM) and Business Process Re-engineering (BPR) methods. VSM is used to map initial conditions and identify non-value-added activities (waste), while BPR is used to formulate radical remedial solutions. The results of the analysis showed several main problems, namely delays in the supply of raw materials, the absence of standardization of sofa frames and covers, and production processes that ran in parallel. The proposed solutions include the implementation of make-to-stock and make-to-order hybrid systems, the implementation of safety stock of frame materials, and the standardization of dimensions and processes. These changes result in more efficient production processes, shorten order fulfillment times, and improve product quality consistency. This research shows that the integration of VSM and BPR can be a strategic approach in improving the manufacturing performance of MSMEs.
Full Text:
PDFReferences
N. O. Aissaoui, “A BPMN-VSM based process analysis to improve the efficiency of multidisciplinary outpatient clinics,” Prod. Plan. Control, vol. 35, no. 5, pp. 461–491, 2024, doi: 10.1080/09537287.2022.2098199.
C. Ma, “A Numerical Study of Reinforcement Structure in Shaft Construction Using Vertical Shaft Sinking Machine (VSM),” Buildings, vol. 14, no. 8, 2024, doi: 10.3390/buildings14082402.
T. Y. Rosiani, “Sustainable Manufacturing Assessment using Sustainable VSM and AHP involving Workload and Machine Efficiency: A Case Study in Indonesian Paving Block Production,” Circ. Econ. Sustain., vol. 4, no. 3, pp. 2049–2071, 2024, doi: 10.1007/s43615-024-00366-6.
M. Al-Rifai, “Mapping the path to efficiency: harnessing value stream mapping (VSM) and lean tools for streamlined electronic device manufacturing,” Meas. Bus. Excell., vol. 28, no. 3, pp. 396–414, 2024, doi: 10.1108/MBE-06-2024-0087.
C. Srinivas, “Magnetic properties of nanoscaled MgFe2O4 explored at liquid nitrogen temperature using VSM, Mössbauer and FC-ZFC techniques: Structural and microstructural properties,” Inorg. Chem. Commun., vol. 179, 2025, doi: 10.1016/j.inoche.2025.114738.
A. Seizovic, “Cyber Battle Management Systems (CBMS) is Considered as Systems of Systems (SoS) and Emergent Behavior is Present, where Viable System Model (VSM) only Controls System Variety,” 2024. doi: 10.1080/08839514.2024.2384333.
W. Huang, “A DC-Equal-Area Based Virtual Inertia and Damping Evaluation Method for Ship VSM-Controlled Electric Propulsion,” IEEE Trans. Transp. Electrif., vol. 10, no. 4, pp. 7731–7740, 2024, doi: 10.1109/TTE.2024.3450315.
F. P. Santhiapillai, “BPMN-VSM-based knowledge-work process analysis and improvement in police services: a case study,” Int. J. Product. Perform. Manag., vol. 73, no. 7, pp. 2116–2135, 2024, doi: 10.1108/IJPPM-12-2022-0604.
S. Paine, “Utilising VSM insights to address health system disconnects: introducing three novel organisational pathologies,” Kybernetes, 2024, doi: 10.1108/K-11-2023-2450.
F. Khair, “Improvement and analysis of aircraft maintenance flow process using lean manufacturing, PDCA, PICA, and VSM for sustainable operation system,” 2024. doi: 10.1088/1755-1315/1324/1/012071.
Q. Yang, “Study on lean production management of new energy vehicle body painting based on the dual perspectives of digital transformation and VSM,” PLoS One, vol. 20, no. 2, 2025, doi: 10.1371/journal.pone.0318253.
K. Momoh, “Single-FCS Based VSM With SOC Voltage Feedback Controller for Future E-Mobility Network,” 2024. doi: 10.1109/PECON62060.2024.10827682.
D. I. A. Hassan, “Wastes Detection Using a Value Stream Mapping (VSM) Technique in an Electronic-Based Manufacturing Company,” 2024. doi: 10.1007/978-3-031-51859-1_1.
A. Sapkota, “On the origin of systematic errors in VSM torque curves,” Aip Adv., vol. 14, no. 1, 2024, doi: 10.1063/9.0000770.
R. I. Sianturi, “Reduction of waste in biodiesel production with Value Stream Mapping (VSM),” 2024. doi: 10.1051/bioconf/202414601045.
L. Heryawan, “Medical Record Document Search with TF-IDF and Vector Space Model (VSM),” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 14, no. 3, pp. 847–852, 2024, doi: 10.18517/ijaseit.14.3.19606.
R. Sun, “Multi-hinge elastic foundation beam model for assembled VSM shafts in soft soil layers,” Tumu Gongcheng Xuebao China Civ. Eng. J., vol. 57, pp. 36–42, 2024, doi: 10.15951/j.tmgcxb.2024.S69.
K. Noueihed, “Production system state analysis and improvement using VSM, simulation, and fuzzy logic,” Smart Sustain. Built Environ., 2024, doi: 10.1108/SASBE-05-2024-0191.
M. Kanatbekova, “ABBA-VSM: Time Series Classification Using Symbolic Representation on the Edge,” 2025. doi: 10.1007/978-981-96-0805-8_3.
C. C. Yong, “Improving Production Line Performance Through VSM and Simulation in Electronics Manufacturing Industry,” 2024. doi: 10.1007/978-981-99-8819-8_43.
D. Gandomzadeh, “Magnetostrictive behavior of pure nickel core: A study on the effects of annealing and magnetization using VSM and optical microscopy techniques,” E Prime Adv. Electr. Eng. Electron. Energy, vol. 7, 2024, doi: 10.1016/j.prime.2023.100414.
J. Meng, “Crawler Algorithm of Network Public Opinion Topic Based on VSM,” 2025. doi: 10.1016/j.procs.2025.04.400.
S. Wu, “VSM-ACT-R: Toward Using Cognitive Architecture For Manufacturing Solutions,” 2024. doi: 10.1007/978-3-031-72241-7_7.
R. Gustiari, “Techno-Economic Analysis of Utilization of Tofu Production Liquid Waste into Liquid Organic Fertilizer Using Experimental Methods,” J. Econ. Bus. Ind., vol. 1, no. 1, pp. 10–18, 2023.
J. Ayu and D. S. Yani, “A Decision Support System for Evaluation Service Quality by Fuzzy SERVQUAL: A Case Study of a Modern Riteil,” J. Ris. Ilmu Tek., vol. 1, no. 3, pp. 163–174, 2023.
D. Fitriani, R. Nasution, and N. Sari, “Productivity Analysis on Liquid Nitrogen (LIN) and Liquid Oxygen (LOX) Production Using Objective Matrix (OMAX) Method,” J. Ris. Ilmu Tek., vol. 1, no. 3, pp. 139–150, 2023.
D. P. Sari, “Business Feasibility Analysis of Sumedang Tofu MSMEs with Value Engineering Approach,” J. Econ. Bus. Ind., vol. 1, no. 1, pp. 20–31, 2023.
K. S. Ramakrishna, “Magnetic properties of Ni-Cu-Zn ferrite nanoparticles at cryogenic temperature probed under Mössbauer and VSM studies,” Cryogenics (Guildf)., vol. 147, 2025, doi: 10.1016/j.cryogenics.2025.104040.
M. K. Singh, “Impact of UPQC in Renewable Integrated Distribution Network on VSM Enhancement and Energy Savings,” 2025. doi: 10.1007/978-981-96-1012-9_21.
G. Lyu, “L-VSM: Label-Driven View-Specific Fusion for Multiview Multilabel Classification,” IEEE Trans. Neural Networks Learn. Syst., vol. 36, no. 4, pp. 6569–6583, 2025, doi: 10.1109/TNNLS.2024.3390776.
A. Marin-Hurtado, “Adaptive Inertia Estimation Based on Projection Identification Algorithm Applied to Unbalance Systems with VSM,” 2024. doi: 10.1109/PEDG61800.2024.10667429.
M. S. Medina, “Value Stream Mapping (VSM),” 2024. doi: 10.1007/978-3-0317-0984-5_20.
A. Sik, “Vertical Stirred Mill (VSM) Welding Machine Design,” Gazi Univ. J. Sci., vol. 38, no. 2, pp. 847–863, 2025, doi: 10.35378/gujs.1469645.
K. J. Cabanillas-Vigo, “Environmental Management Proposal using VSM Tools, 5S, Man-Machine, OWAS and Westinghouse to Reduce Production Waste in the Rotisserie Chicken Restaurant,” 2024. doi: 10.18687/LEIRD2024.1.1.608.
S. Liu, “RESEARCH ON A NOVEL VSM INFORMATION RETRIEVAL TECHNOLOGY,” J. Nonlinear Convex Anal., vol. 25, no. 6, pp. 1491–1500, 2024, [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85196540084&origin=inward
C. N. Wang, “Optimizing Production Line Efficiency via DMAIC, VSM and FMEA: A Case Study of an Electronics Manufacturing Services Company,” EMJ Eng. Manag. J., 2025, doi: 10.1080/10429247.2025.2496662.
F. Stowell, “‘Tektology’, VSM and the digital age,” 2025. doi: 10.1108/K-11-2023-2310.
L. O. Oyewobi, “Lean construction management: stationary analysis of the barriers to the implementation of value stream mapping (VSM) in achieving sustainable construction project,” Int. J. Lean Six Sigma, 2025, doi: 10.1108/IJLSS-09-2024-0210.
J. K. Sharma, “Lean and sustainability assessment in the sawmill industry using Sus-VSM: A case study in the context of Fiji,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., 2024, doi: 10.1177/09544089241244588.
F. de L. Nunes, “MIF: a mapping approach based on the combination of VSM 4.0 and Shingo production engine applied in a case study of Brazilian logistics distribution centre,” Int. J. Process Manag. Benchmarking, vol. 18, no. 2, pp. 183–215, 2024, doi: 10.1504/IJPMB.2024.141536.
A. K. Garside, “Enhanced Sustainability Assessment Framework for Plywood Manufacturing: A Multi-Method Approach Using Delphi Technique, BWM, and S-VSM,” J. Optimasi Sist. Ind., vol. 23, no. 2, pp. 188–206, 2024, doi: 10.25077/JOSI.V23.N2.P188-206.2024.
K. Roumaih, “Effect of thermal neutron irradiation on CoLaxFe2-xO4 nanoferrites: XRD, FTIR, UV, and VSM spectroscopy,” Nucl. Instruments Methods Phys. Res. Sect. B Beam Interact. with Mater. Atoms, vol. 559, 2025, doi: 10.1016/j.nimb.2024.165592.
DOI: http://dx.doi.org/10.24014/sitekin.v22i2.35822
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 SITEKIN: Jurnal Sains, Teknologi dan Industri
 | Editorial Address: FAKULTAS SAINS DAN TEKNOLOGI UIN SULTAN SYARIF KASIM RIAU Kampus Raja Ali Haji Gedung Fakultas Sains & Teknologi UIN Suska Riau Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293  Email: sitekin@uin-suska.ac.id© 2023 SITEKIN, ISSN 2407-0939 |
Whatsapp (Direct Chat)SITEKIN Journal Indexing:
Google Scholar | Garuda | Moraref | IndexCopernicus | SINTA
SITEKIN by http://ejournal.uin-suska.ac.id/index.php