Efforts To Improve the Quality of Welding Plastic Pallet Type HDX1210R With Six Sigma Method at PT. Pallets

Mochamad Alfi Septian Jaya, Achmad Misbah

Abstract


PT. Pallets is a manufacturing company that processes plastic waste into products that have value, namely plastic pallets. A plastic pallet is a flat city-shaped container used as a base for storing and transporting goods in logistics warehousing. This study aims to improve the quality of plastic pallet welding products of the HDX1210R type at PT. Pallets. This study uses the Six Sigma method with the DMAIC (Define - Measure - Analyze - Improve - Control) approach with the help of fishbone diagrams, Pareto diagrams, and FMEA. From the company's historical data from March 2022 to March 2023, 3 types of defects were obtained, with loose welding as the highest type of defect, with a percentage of 89% of the total product defects. The overall DPMO average value is 49908.1405, and the average sigma value is 3.191. From FMEA calculations, the highest RPN value is obtained for frequently changing over machines with a scale value of 480. The proposed improvements can be made by changing the hitter model and size, modifying the mold (pallet molding) by adding the welding area on the pallet and making SOPs for producing HDX1210R-type pallet welding.


Full Text:

PDF

References


Kotler Philip dan Kevin L. Keller, Marketing Management. 2016.

T. D. S. D. R. R. Dewi, S. K., & Sartono, “Pendekatan Lean Thinking Untuk Pengurangan Waste Pada Proses Produksi Plastik PE.,” Res. Rep., 2014.

S. S. (2022). Dani, D. A. I. A., & Dahda, “Analisis kecacatan produk menggunakan metode statistical quality control di PT. XYZ.,” JENIUS J. Terap. Tek. Ind., vol. 3(2), pp. 103–113, 2022.

R. Ridwan, A., Ferdinant, P. F., & Aldiandru, “Perancangan perbaikan lean six sigma dalam proses produksi baja tulangan dengan integrasi value stream mapping dan design of experiment,” J. Ind. Serv., vol. 2, 2018.

V. Kaswan, M. S., Rathi, R., Cross, J., Garza-Reyes, J. A., Antony, J., & Yadav, “Integrating Green Lean Six Sigma and industry 4.0: a conceptual framework.,” J. Manuf. Technol. Manag., vol. 1, pp. 87–121, 2022.

I. Rosyidasari, A., & Iftadi, “Implementasi Six Sigma dalam Pengendalian Kualitas Produk Refined Bleached Deodorized Palm Oil. Jurnal INTECH Teknik Industri Universitas Serang Raya,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 6(2), pp. 113-122., 2020.

F. Pangestu, P., & Fahma, “Implementasi Six sigma dalam peningkatan kualitas proses produksi LED TV di PT Sharp Electronics Indonesia.,” Performa Media Ilm. Tek. Ind., p. 17(2)., 2019.

F. Ahmad, “Six sigma dmaic sebagai metode pengendalian kualitas produk kursi pada ukm.,” JISI J. Integr. Sist. Ind., vol. 6(1), pp. 11-17., 2019.

F. Krisnaningsih, E., & Hadi, “Strategi mengurangi produk cacat pada pengecatan boiler steel structure dengan metode six sigma di pt. cigading habeam center.,” J. InTent J. Ind. Dan Teknol. Terpadu, vol. 3(1), pp. 11–24, 2020.

L. Kusumawati, A., & Fitriyeni, “Pengendalian Kualitas Proses Pengemasan Gula Dengan Pendekatan Six Sigma,” J. Sist. Dan Manaj. Ind., vol. 1, pp. 43–48, 2017.

Kotler Philip dan Kevin L. Keller., Marketing Management, Edisi ke 1. Penerbit Pearson Education Limited 2016., 2016.

E. W. A. Belo, Armandina Maria, Joko Susetyo, “Jurnal Rekavasi,” J. REKAVASI, vol. 4(2), pp. 60–118., 2016.

A. A. L. Harahap, B., Parinduri, L., & Fitria, “Analisis Pengendalian Kualitas Dengan Menggunakan Metode Six Sigma (Studi Kasus : PT. Growth Sumatra Industry).,” J. Bul. Utama Tek., vol. 13(3), pp. 211–219., 2018.

J. Ardiansyah, “Penerapan Metode Six Sigma Sebagai Alat Pengendalian Kualitas Pada PT. Super Plastin Tasikmalaya,” (Doctoral Diss. Univ. Siliwangi)., 2021.

C. H. Amanati, “Implementasi Six Sigma Guna Mengendalikan Kualitas Produksi Untuk Mengurangi Tingkat Kecacatan.,” (Studi Kasus Pt Mitra Rekatama Mandiri)., 2022.

S. O. Wessiani, N. A. & Sarwoko, “Risk analysis of poultry feed production using fuzzy FMEA.,” Ind. Eng. Serv. Sci. pp., pp. 270–281, 2015.




DOI: http://dx.doi.org/10.24014/sitekin.v21i1.24803

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 SITEKIN: Jurnal Sains, Teknologi dan Industri



Editorial Address:
FAKULTAS SAINS DAN TEKNOLOGI
UIN SULTAN SYARIF KASIM RIAU
Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sitekin@uin-suska.ac.id
© 2023 SITEKIN, ISSN 2407-0939

SITEKIN Journal Indexing:

Google Scholar | Garuda | Moraref | IndexCopernicus | SINTA


Creative Commons License
SITEKIN by http://ejournal.uin-suska.ac.id/index.php