Analysis Of the Influence of The Work Environment on Employee Health in The Production Process Uses FMEA And SEM Methods

Dinda Okta Dwiyanti Ridwan Gucci; Muhammad Adi Sukma Nalendra

doi:10.24014/jti.v11i2.38042

Analysis Of the Influence of The Work Environment on Employee Health in The Production Process Uses FMEA And SEM Methods

Dinda Okta Dwiyanti Ridwan Gucci, Muhammad Adi Sukma Nalendra

Abstract

Industrial transformation at the moment this is very impactful for development technology periodically large and complex. Development this industrial technology usually called industry 4.0. Industrial revolution 4.0. influence the world of business even. The industrial revolution had an impact on aspects life humans, including in the field occupational safety and health (K3). PT. XYZ is company fiberglass manufacturing operating in Batam still difficulty in face challenge related K3 problems. Although has There is K3 regulations and standards that have been determined in the fiberglass manufacturing industry. Bad his knowledge about K3 owned by the operator so can cause Health problems for employees. Based on from results of data analysis that has been carried out can be known that mark connection environment Work to disturbance health is obtained value 85.8% with that can be concluded that environment work is very influential to health problems. Can be known. The resulting RPN value is 80 points the is in the factors reason disturbance health Work that is man. With That need do purposeful improvement. For minimize happen disturbance health.

Keywords: Health Disorders, K3, Industrial Revolution

Full Text:

PDF

References

D. Okta Dwiyanti Ridwan Gucci, I. Anugrah, R. Egie Fahruddini, A. Boy Sandi Manalu, P. Melati Paula, and M. Saleh, “Analisis Pencahayaan Terhadap Produktivitas Karyawan Di Pt. Xyz Batam Indonesia,” Vol. 3, No. 2, 2025, Doi: 10.62375/Logistics.V3i2.596.

J. Hasil Penelitian dan Karya Ilmiah, D. Okta Dwiyanti Ridwan Gucci, and M. Adi Sukma Nalendra, “Identifikasi Human Error Pada Proyek Konstruksi dan Perancangan Layout menggunakan Sign System Visual Identification of Human Errors in Construction Projects and Layout Designs using the Visual Sign System.”

R. Tjahjanto and I. Aziz, “Analisis Penyebab Terjadinya Kecelakaan Kerja Di Atas Kapal Mv. Cs Brave,” 2016.

H. Prisilia and D. A. Purnomo, “Analisa Penerapan K3 dengan Metode FMEA dan FTA pada PT. Sumber Alam Santoso Pratama Banyuwangi,” G-Tech: Jurnal Teknologi Terapan, vol. 7, no. 4, pp. 1750–1759, Oct. 2023, Doi: 10.33379/Gtech.V7i4.3390.

Apriyan And H. Setiawan, “Analisis Risiko Kecelakaan Kerja Pada Proyek Bangunan Gedung Dengan Metode Fmea.”

K. Nielsen, M. B. Nielsen, C. Ogbonnaya, M. Känsälä, E. Saari, and K. Isaksson, “Workplace resources to improve both employee well-being and performance: A systematic review and meta-analysis,” Apr. 03, 2017, Routledge. doi: 10.1080/02678373.2017.1304463.

D. O. D. Ridwan Gucci, M. A. S. Nalendra, P. C. P. Sarena, and Y. Saleh, “Hierarchical Control Planning Based on the Film ‘Avatar: The Way of Water’ to Minimize Work Accidents Among Fishermen,” Jurnal Sistem Teknik Industri, vol. 26, no. 1, pp. 57–69, Jan. 2024, doi: 10.32734/jsti.v26i1.13571.

W. B. Schaufeli and T. W. Taris, “A critical review of the job demands-resources model: Implications for improving work and health,” in Bridging Occupational, Organizational and Public Health: A Transdisciplinary Approach, vol. 9789400756403, Springer Netherlands, 2014, pp. 43–68. doi: 10.1007/978-94-007-5640-3_4.

S. Yazdanirad, A. Hossein Khoshakhlagh, S. Al Sulaie, C. L. Drake, W. Emerson, and C. Author, “The effects of occupational noise on sleep: a systematic review,” 2023.

Wesli, “Pengaruh Pengetahuan Berkendaraan Terhadap Perilaku Pengendara Sepeda Motor Menggunakan Equation Structural Model (Sem),” Teras Jurnal, Vol. 5, No. 1, Mar. 2015.

F. Surayya Lubis et al., “Analisis Kepuasan Pelanggan dengan Metode Servqual dan Pendekatan Structural Equation Modelling (SEM) pada Perusahaan Jasa Pengiriman Barang di Wilayah Kota Pekanbaru,” Jurnal Sains, Teknologi dan Industri, vol. 16, no. 02, pp. 25–31, 2019.

E. Rahayu and B. Cahyadi, “Jurnal Rekayasa Dan Optimasi Sistem Industri Analisa Tingkat Kebisingan Terhadap Produktivitas Kerja Dengan Menggunakan Metode Sem Dan Fmea Di Pt. Rotary Electrical Machine Service,” 2020.

B. A. Ningsi and L. Agustina, “Analisis Kepuasan Pelanggan Atas Kualitas Produk dan Pelayanan Dengan Metode SEM-PLS,” Jurnal Statistika dan Aplikasinya (JSA), vol. 2, no. 2, 2018.

H. Purnomo, A. Kisanjani, W. I. Kurnia, and S. Suwarto, “Pengukuran Kinerja Green Supply Chain Management Pada Industri Penyamakan Kulit Yogyakarta,” Jurnal Ilmiah Teknik Industri, vol. 18, no. 2, pp. 161–169, Dec. 2019, doi: 10.23917/jiti.v18i2.8535.

M. Panjaitan, “Pengaruh Lingkungan Kerja Terhadap Produktivitas Kerja Karyawan,” Medan, Dec. 2017. [Online]. Available: Http://Ejournal.Lmiimedan.Net/Index.Php/Jm/Article/View/7/7

J. Hasil Penelitian dan Karya Ilmiah, D. Okta Dwiyanti Ridwan Gucci, and M. Adi Sukma Nalendra, “Perancangan Visual Display Informasi Keselamatan Dan Kesehatan Kerja (K3) Dengan Pendekatan Ergonomi an Komunikasi Visual.”

U. Islam, N. S. Ampel, S. Surabaya, and J. Timur, “Pengukuran Risiko Keamanan Aset TI Menggunakan Metode FMEA dan Standar ISO/IEC 27001:2013 Lailatul Munaroh 1 Yusuf Amrozi 2 Risky Agung Nurdian 3.”

J. Hasil, P. Dan, K. Ilmiah, M. H. Aiman, and M. Nuruddin, “Analisis Kecacatan Produk Pada Mesin Pemotongan Dengan Menggunakan Metode FMEA di UD. Abdi Rakyat.”

D. P.-S. Zuhdi, B. Suharjo, and H. Sumarno, “Perbandingan Pendugaan Parameter Koefisien Struktural Model Melalui Sem.”

DOI: http://dx.doi.org/10.24014/jti.v11i2.38042