Designing Standard Operating Procedure (SOP) for Planning and Implementing Machine Maintenance for the Implementation of ISO 9001:2015 Clause 7.1.3 using the Business Process Management (BPM) Method in Hijab Printing Production

Rahmi Anugrah Kunanti; Wiyono Wiyono; Sheila Amalia Salma

doi:10.24014/jti.v10i2.32674

Designing Standard Operating Procedure (SOP) for Planning and Implementing Machine Maintenance for the Implementation of ISO 9001:2015 Clause 7.1.3 using the Business Process Management (BPM) Method in Hijab Printing Production

Rahmi Anugrah Kunanti, Wiyono Wiyono, Sheila Amalia Salma

Abstract

Maintenance management is important for production companies that rely on machines as the main infrastructure. UMKM Meflanna, as a printed hijab producer, has not managed machine maintenance routinely and effectively, which impacts the cessation of the production process and the failure to achieve several production targets. This study aims to compile a Standard Operating Procedure (SOP) for planning and implementing machine maintenance using the Business Process Management (BPM) method. The BPI method supports business process improvement by analysing the gap between actual conditions and the requirements of ISO 9001:2015 clause 7.1.3, which is the basis for designing process improvements. This study produces an SOP for Machine Maintenance Planning and Implementation, which includes preventive maintenance planning procedures and corrective and preventive maintenance implementation. It also provides supporting forms to document maintenance information. With structured procedures and better documentation, UMKM Meflanna is expected to maintain production continuity and achieve the set targets.

Keywords: Business Process Management (BPM), ISO 9001:2015 clause 7.1.3, maintenance management, Standard Operating Procedure (SOP)

Full Text:

PDF

References

E. Oktananda, L. H. Atrinawati, M. Gilvy, dan L. Putra, “Penyusunan Standar Operasional Prosedur Gudang pada PT. XYZ,” 2021.

E. Z. Palvölgyi, “Customer process-centric artefacts: a literature review,” 2021. doi: 10.1108/BPMJ-07-2020-0328.

L. Frank, “Design heuristics for customer-centric business processes,” Business Process Management Journal, vol. 26, no. 6, hlm. 1283–1305, 2020, doi: 10.1108/BPMJ-06-2019-0257.

Y. Ziegler, “Implementing halal logistics in a non-Muslim-dominant environment: a proposal for reengineering the business processes in two stages,” Business Process Management Journal, vol. 28, no. 8, hlm. 48–65, 2022, doi: 10.1108/BPMJ-12-2020-0593.

M. R. Irwanto, “SIPOC business model process to prevent plagiarism in an electronic journal,” 2017. doi: 10.1109/ICSITech.2017.8257162.

M. M. Al-Shammari, “Business process reengineering for designing a knowledge-enabled customer-centric competitiveness strategy,” Business Process Management Journal, vol. 29, no. 6, hlm. 1706–1733, 2023, doi: 10.1108/BPMJ-02-2023-0074.

S. D. Luozzo, “On the relationship between human factor and overall equipment effectiveness (OEE): An analysis through the adoption of analytic hierarchy process and ISO 22400,” International Journal of Engineering Business Management, vol. 15, 2023, doi: 10.1177/18479790231188548.

S. A. Albliwi, “A systematic review of Lean Six Sigma for the manufacturing industry,” Business Process Management Journal, vol. 21, no. 3, hlm. 665–691, 2015, doi: 10.1108/BPMJ-03-2014-0019.

D. Heckl, “Uptake and success factors of Six Sigma in the financial services industry,” Business Process Management Journal, vol. 16, no. 3, hlm. 436–472, 2010, doi: 10.1108/14637151011049449.

L. K. Tsironis, “Road towards Lean Six Sigma in service industry: a multi-factor integrated framework,” Business Process Management Journal, vol. 22, no. 4, hlm. 812–834, 2016, doi: 10.1108/BPMJ-08-2015-0118.

A. Syafitrah, A. Suhaini, M. F. Tonaji, dan M. Syukri, “Analisa Standard Operating Procedure (SOP) Produksi PK (Palm Kernel) Menjadi PKE (Palm Kernel Expeller) Area KCP (Kernel Crushing Plant),” Jurnal Teknologi dan Manajemen Industri Terapan, vol. 2, no. I, hlm. 19–24, 2023.

N. M. M. I. Ansori, “Sistem Perawatan Terpadu (Integrated Maintenance System),” 2013.

D. I. Burhanuddin, “Improvement Kematangan Bisnis Proses dengan Metode Business Process Maturity Model (BPMM) serta Pendekatan Process Classification Framework (PCF),” 2023.

A. D. R. Fernández, “Business Process Management for optimizing clinical processes: A systematic literature review,” Health Informatics J, vol. 26, no. 2, hlm. 1305–1320, 2020, doi: 10.1177/1460458219877092.

J. K. Nwankpa, “Process innovation in the digital age of business: the role of digital business intensity and knowledge management,” Journal of Knowledge Management, vol. 26, no. 5, hlm. 1319–1341, 2022, doi: 10.1108/JKM-04-2021-0277.

M. Dumas, M. La Rosa, J. Mendling, dan H. A. Reijers, Fundamentals of Business Process Management. Springer Berlin Heidelberg, 2013. doi: 10.1007/978-3-642-33143-5.

P. Hopkin, “Fundamentals of Risk Management,” London, 2017.

A. Y. F. Leung, “Report for ISSMGE TC309/TC304/TC222 and ASCE Geo-Institute Risk Assessment and Management Committee Fourth Machine Learning in Geotechnics Dialogue on ‘Machine Learning Supremacy Projects’: 5 December 2023, Okayama Convention Center, Okayama, Japan,” Georisk, vol. 18, no. 1, hlm. 304–313, 2024, doi: 10.1080/17499518.2024.2316879.

E. Lamine, “BPRIM: An integrated framework for business process management and risk management,” Comput Ind, vol. 117, 2020, doi: 10.1016/j.compind.2020.103199.

W. J. Palmer, J. M. Maloney, dan J. L. Heffron, “Construction insurance, bonding, and risk management,” hlm. 414, 1996.

J. Warren, “Key Performance Indicators (KPI) - Definition and Action,” London, 2011.

“LAPORAN PENCAPAIAN KPI TAHUN 2022 PT PLN ( Persero ) Direktorat Manajemen Proyek dan Energi Baru Terbarukan Unit Induk Pembangunan Nusa Tenggara,” no. 1, hlm. 2022, 2022.

W. Torell dan V. Avelar, “Mean Time Between Failure: Explanation and Standards Revision 1,” 2010.

K. Jaskólski, “Availability of Automatic Identification System (AIS) Based on Spectral Analysis of Mean Time to Repair (MTTR) Determined from Dynamic Data Age,” Remote Sens (Basel), vol. 14, no. 15, 2022, doi: 10.3390/rs14153692.

Z. Wu, “Review on research of equipment mean time to repair demonstration methods,” 2020. doi: 10.3969/j.issn.1001-506X.2020.12.32.

E. Y. Botyan, “Methodology for refined calculation of mean time to repair of mining dump truck suspension elements with account of mining and technical conditions of their operation,” Gornaya Promyshlennost, vol. 2024, no. 1, hlm. 71–76, 2024, doi: 10.30686/1609-9192-2024-1-71-76.

DOI: http://dx.doi.org/10.24014/jti.v10i2.32674