Analysis Risk K3 Using JSA and HIRARC Methods Phosphoric Acid Factory on PT. Petrokimia Gresik

Muhammad Khoiru Rozikin; Hidayat Hidayat; Akhmad Wasiur Rizqi

doi:10.24014/jti.v10i1.29581

Analysis Risk K3 Using JSA and HIRARC Methods Phosphoric Acid Factory on PT. Petrokimia Gresik

Muhammad Khoiru Rozikin, Hidayat Hidayat, Akhmad Wasiur Rizqi

Abstract

PT. Petrokimia Gresik is one of the industries that produce fertilisers, non-fertilizers, and other chemicals. PT. Petrokimia Gresik is divided into several departments, including the phosphoric acid factory. This research aims to identify and reduce potential hazards during the production process. This research uses (JSA) method to identify the hazard stage and (HIRARC) method to conduct risk analysis. Based on the risk hazard identification results, each job will be assessed based on severity and likelihood to establish the risk level. The research found that all extreme-risk jobs had 4 risks, high risks had 15 risks, medium risks had 2 risks, and no jobs with low-risk levels were found. The control plan carried out in this study is to control by elimination, engineering, administration, and personal protective equipment (PPE).

Keywords: Occupational Health Safety, JSA, HIRARC.

Full Text:

PDF

References

F.Novianti, A.Windriya, U.Diponegoro, andU.Diponegoro, “Hazard Analysis of Occupational Health and Ssfety ( OHS ) Using The JSA ( Job Safety Analysis ) Method in Grey Weaving 2 Warehouse PT,” vol. 2, no. 1, pp. 33–47, 2023.

M.Nur, “Analisis Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard And Operability Study (HAZOP) Di PT. XYZ,” J. Tek. Ind, vol. 4, no. 2, 2018.

M.Jufriyanto, “Analisis Keselamatan Dan Kesehatan Kerja Dengan Metode Hazard And Operability (Hazop) Pada Workshop PT. Petrogas Jatim Utama,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 9, no. 2, pp. 472–480.

M.Nur, “Analisis Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard And Operability Study (HAZOP) Di PT. XYZ,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 4, no. 2, p. 133, 2020, doi: 10.24014/jti.v4i2.6627.

K.Afriani, “Manajemen Risiko Kesehatan Dan Keselamatan Kerja Pada Pekerja Industri Kapal Pinisi Di Kelurahan Tanah Lemo Kecamatan Bontobahari Kabupaten Bulukumba,” 2021.

W. F.Supriyadi, T. S. P.Arifin, andF. N.Abdi, “Jurnal Ilmu Pengetahuan dan teknologi sipil Analisis Risiko K3 Menggunakan Pendekatan Hiradc Dan Metode JSA ( Studi Kasus : Proyek Pembangunan Gedung Bpkad Samarinda ) Abstrak Jurnal Ilmu Pengetahuan dan teknologi sipil,” pp. 72–81.

P.Studi et al., “Identifikasi Dan Analisis Risiko Kecelakaan Kerja Dengan Metode JSA ( JOB Safety Analysis ) Di Bengkel Pemesinan Smk Nurul Islam Gresik,” vol. 20, no. 1, pp. 300–307, 2022.

W. R.Rizkullah, H. C.Suroso, andA.Wijaya, “Analisis Resiko Bahaya di Plat Cair 1 Menggunakan Metode JSA ( Job Safety Analysis ) dan Fine,” no. Senastitan Iv, pp. 1–6, 2024.

OHSAS 18002, Persyaratan Sistem Manajemen K3. OHSAS Project Group, 2008.

S.Ramli, Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001. PT. Dian Rakyat, 2010.

B. F.Aprilla andD.Yulhendra, “Penerapan Metode HIRARC dalam Menganalisis Risiko Bahaya dan Upaya Pengendalian Kecelakaan Kerja di Area Crusher dan Belt Conveyor PT . Semen Padang,” vol. 8, no. 1, pp. 203–212.

M.Nur, V.Valentino, R. K.Sari, andA. A.Karim, “Analisa Potensi Bahaya Kecelakaan Kerja Terhadap Pekerja Menggunakan Metode Hazard Identification, Risk Assement And Risk Control (HIRARC) Pada Perusahaan Aspal Beton,” J. Teknol. Dan Manaj. Ind. Terap., vol. 2, no. 3, pp. 150–158, 2023.

M.Siska andM.Gassani, “Analisis 5s dan Hirarc Pada Stasiun Kerja Rotary, Dryer dan Veneer Compouser di PT. Asia Forestama Raya Pekanbaru,” J. Tek. Ind., vol. 4, no. 1, 2018.

F.Yuamita, “Analisis Risiko Potensi Kecelakaan Kerja Pada Pekerja Departemen Persiapan Produksi Menggunakan Metode HIRADC (Hazard Identification, Risk Assesment And …,” J. Teknol. dan Manaj. Ind. Terap., 2023, [Online]. Available: http://jurnal-tmit.com/index.php/home/article/view/63

M. A.Pratama, A. W.Rizqi, andH.Hidayat, “Analisis Resiko K3 Pada Pekerjaan Fabrikasi Konstruksi Di Cv. Arfa Putra Karya Dengan Metode Jsa (Job Safety Analysis),” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, pp. 314–323, 2022.

I.Rahmanto and. I.Hamdy, “Analisa Resiko Kecelakaan Kerja Karyawan Menggunakan Metode Hazard and Operability (HAZOP) di PT PJB Services PLTU Tembilahan,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. II, pp. 53–60, 2022.

M. A.Wagiman andF.Yuamita, “Analisis Tingkat Risiko Bahaya Kerja Menggunakan Metode Hazop (Hazard And Operability) Pada PT Madubaru PG/PS Madukismo.,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 4, pp. 277–285, 2022.

R. P.Khoiri, R. D.Atmajayani, andT.Widodo, “Occupational Health And Safety ( K3 ) Risk Analysis Using Hiradc And Jsa Methods In,” vol. 4, no. 2, pp. 195–210, 2023.

S. S.Arnau, “Musculoskeletal disorders risk assessment methods: a scoping review from a sex perspective,” Ergonomics. 2023. doi: 10.1080/00140139.2023.2168767.

P. J.Beliveau, “Musculoskeletal disorder risk assessment tool use: A Canadian perspective,” Appl. Ergon., vol. 102, 2022, doi: 10.1016/j.apergo.2022.103740.

S.Veerasammy, “Multi-task exposure assessment to infer musculoskeletal disorder risk: A scoping review of injury causation theories and tools available to assess exposures,” Applied Ergonomics, vol. 102. 2022. doi: 10.1016/j.apergo.2022.103766.

AS/NZS 4360, Risk Management. 1999.

J. T.Industri, S.Medan, I. R.Assesment, andK.Kerja, “Analisis Resiko Kecelakaan Kerja di CV . Jati Jepara Furniture dengan Metode HIRARC ( Hazard Identification Risk Assessment and Risk Control ) Lamhot Willy Afredo *, Uni Pratama Pebrina Br Tarigan,” vol. 4, no. 2, 2021.

M. I.Hamdani and.Andesta, “G-Tech : Jurnal Teknologi Terapan,” vol. 8, no. 2, pp. 887–895, 2024.

D. E.Wibowo, I.Wahyuni, A. D.Hastutiningsih, I. M.Nurshefa, andD. D.Rimbawati, “Occupational safety and health risk analysis using HIRARC and JSA methods in building projects construction,” no. August, 2023, doi: 10.1063/5.0128851.

D. I.Pabrik, K.Tempe, A. R.Afillah, F.Handoko, andH.Galuh, “Penggunaan Metode Jsa Untuk K3 Sebagai Pengendalian Risiko Kecelakaan Kerja ( Studi Kasus Pada Industri Keripik Tempe Andra ),” vol. 6, no. 2, pp. 237–244, 2023.

DOI: http://dx.doi.org/10.24014/jti.v10i1.29581