Strategi Waktu Penggantian Filter Mesin Grain Cooling Pellet di PT. Indofood Sukses Makmur Tbk. Divisi Bogasari Flour Mills Surabaya

Billy Krisna Agusta Aryawirya; I Nyoman Lokajaya

doi:10.24014/jti.v9i2.24160

Strategi Waktu Penggantian Filter Mesin Grain Cooling Pellet di PT. Indofood Sukses Makmur Tbk. Divisi Bogasari Flour Mills Surabaya

Billy Krisna Agusta Aryawirya, I Nyoman Lokajaya

Abstract

Preventive maintenance pada filter Mesin Grain Cooling saat ini sebagian besar dilakukan oleh tenaga kerja sendiri, tidak menggunakan jasa dari tenaga ahli. Dengan demikian perlu dilakukan penelitian untuk menganalisis waktu antar kerusakan filter Mesin Grain Cooling PT. Indofood Sukses Makmur Tbk. Divisi Bogasari Flour Mills Surabaya. Tujuan penelitian adalah untuk mendapatkan waktu antar kerusakan filter Mesin Grain Cooling, dan mendapatkan jadwal preventive maintenance filter Mesin Grain Cooling. Melalui uji kesesuaian distribusi dengan metode Kolmogorov-Smirnov, didapatkan bahwa jarak waktu antar kerusakan perawatan filter Mesin Grain Cooling sesuai dengan distribusi Weibull yaitu didapatkan rata-rata jarak waktu antar kerusakan perawatan filter Mesin Grain Cooling adalah 4,3961 hari ≈ 4 hari, rata-rata jarak waktu atar kerusakan penggantian filter Mesin Grain Cooling = 66 hari. Dengan keandalan sebesar 55,63%. Perawatan Filter pada bulan Januari dilakukan sebanyak 6 kali, bulan februari sebanyak 6 kali, bulan maret sebanyak 6 kali, bulan april sebanyak 7 kali, bulan mei sebanyak 7 kali, bulan juni sebanyak 5 kali, bulan juli sebanyak 7 kali, bulan agustus sebanyak 7 kali, bulan september sebanyak 6 kali, bulan oktober sebanyak 7 kali, bulan november sebanyak 5 kali, bulan desember sebanyak 7 kali. Kemudian untuk penggantian Filter dalam setahun dilakukan sebanyak 5 kali, yaitu pada tanggal 1 Januari, 18 Maret, 3 Juni, 19 Agustus, dan 4 November.

Full Text:

PDF

References

C. C. Thompson, “Relationship between Historical Trends, Equipment Age, Maintenance, and Circuit Breaker Failure Rates,” IEEE Trans. Ind. Appl., vol. 55, no. 6, pp. 5699–5707, 2019, doi: 10.1109/TIA.2019.2937927.

T. Y. Nam, “A Study on Determination of Facility Maintenance Timing for Photovoltaic System Using Hybrid Failure Rate,” Trans. Korean Inst. Electr. Eng., vol. 71, no. 11, pp. 1541–1551, 2022, doi: 10.5370/KIEE.2022.71.11.1541.

M. R. Galankashi, “Maintenance strategy selection in a cement company: An integrated AHP-FAHP approach,” AIP Conference Proceedings, vol. 2217. 2020. doi: 10.1063/5.0000519.

S. Bhanji, “ADVANCED ENTERPRISE ASSET MANAGEMENT SYSTEMS: IMPROVE PREDICTIVE MAINTENANCE and ASSET PERFORMANCE by LEVERAGING INDUSTRY 4.0 and the INTERNET of THINGS (IOT),” Proceedings of the 2021 Joint Rail Conference, JRC 2021. 2021. doi: 10.1115/JRC2021-58346.

R. Mena, “An optimization framework for opportunistic planning of preventive maintenance activities,” Reliab. Eng. Syst. Saf., vol. 215, 2021, doi: 10.1016/j.ress.2021.107801.

S. Luongo, “Human Machine Interface Issues for Drone Fleet Management,” Advances in Intelligent Systems and Computing, vol. 876. pp. 791–796, 2019. doi: 10.1007/978-3-030-02053-8_120.

H. Torun, “Machine criticality level assignment with fuzzy inference system for RCM,” Advances in Intelligent Systems and Computing, vol. 1029. pp. 1363–1370, 2020. doi: 10.1007/978-3-030-23756-1_159.

K. A. F. Mohamed, “Using Risk Based Maintenance Optimization RBMO to Save Costs,” Society of Petroleum Engineers - Abu Dhabi International Petroleum Exhibition and Conference, ADIP 2021. 2021. doi: 10.2118/208026-MS.

A. Rahman, “Industry 4.0 and society 5.0 through lens of condition based maintenance (CBM) and machine learning of artificial intelligence (MLAI),” IOP Conference Series: Materials Science and Engineering, vol. 852, no. 1. 2020. doi: 10.1088/1757-899X/852/1/012022.

Z. Hussain, “Establishing simulation model for optimizing efficiency of CNC machine using reliability-centered maintenance approach,” Int. J. Model. Simulation, Sci. Comput., vol. 10, no. 6, 2019, doi: 10.1142/S179396231950034X.

F. Zhang, “Optimal Maintenance of a System With Multiple Deteriorating Components Served by Dedicated Teams,” IEEE Trans. Reliab., 2022, doi: 10.1109/TR.2022.3190274.

E. F. Mami, “Maintenance optimisation through quality management: A case study in ‘Alzinc’ Plant in Algeria,” Int. J. Product. Qual. Manag., vol. 27, no. 1, pp. 97–123, 2019, doi: 10.1504/IJPQM.2019.099629.

Y. J. Han, “Optimal inspection and replacement strategy for 145 kV gas-insulated switchgear,” Proc. Inst. Mech. Eng. Part O J. Risk Reliab., vol. 236, no. 2, pp. 339–347, 2022, doi: 10.1177/1748006X19893540.

F. Ansari, “Text mining for AI enhanced failure detection and availability optimization in production systems,” CIRP Ann., vol. 70, no. 1, pp. 373–376, 2021, doi: 10.1016/j.cirp.2021.04.045.

M. Yu, “Joint optimization method of production scheduling for prefabricated components based on preventive maintenance,” Chinese Control Conference, CCC, vol. 2022. pp. 1940–1944, 2022. doi: 10.23919/CCC55666.2022.9901757.

A. Giuria-Farías, “Maintenance management model based on RCM and TPM to optimize times and costs within the useful life cycle of nautical assets,” Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, vol. 2022. 2022. doi: 10.18687/LACCEI2022.1.1.747.

V. C. Dewi, V. Amrizal, and F. E. M. Agustin, “Implementation of Adaptive Neuro-Fuzzy Inference System and Image Processing for Design Applications Paper Age Prediction,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 45–57, 2023.

S. S. Lubis, “Identify Financial Ratios to Measure The Company’s Financial Performance,” J. Econ. Bus. Ind., vol. 1, no. 1, pp. 1–10, 2023.

I. N. Permadi and D. B. Nisa, “A Model Experiment Design Using the Taguchi Method: A Case Study Of Making Concrete Roof,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 36–44, 2023.

F. Pohan, I. Saputra, and R. Tua, “Scheduling Preventive Maintenance to Determine Maintenance Actions on Screw Press Machine,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 1–12, 2023.

T. M. Sari and W. Dini, “Risk Assessment and Mitigation Strategy in The Halal Broiler Supply Chain,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 13–24, 2023.

G. Filhaq, S. Aprianto, and H. Alfianto, “Design of Smart Locker Door Using Quality Function Deployment Based on ATMega 2560 Microcontroller,” J. Ris. Ilmu Tek., vol. 1, no. 1, pp. 25–35, 2023.

É. P. Chambel, “RCM3 methodology applied to the cooling system of a Land Military Vehicle with the application of Colored Petri nets,” Proceedings of the 31st European Safety and Reliability Conference, ESREL 2021. pp. 2441–2448, 2021. doi: 10.3850/978-981-18-2016-8_699-cd.

H. A. R. Ardabili, “A probabilistic reliability-centred maintenance approach for electrical distribution networks,” IET Gener. Transm. Distrib., vol. 15, no. 6, pp. 1070–1080, 2021, doi: 10.1049/gtd2.12081.

Z. Ma, “Data-driven decision-making for equipment maintenance,” Autom. Constr., vol. 112, 2020, doi: 10.1016/j.autcon.2020.103103.

L. Ciani, “Condition-based Maintenance for OilGas system basing on Failure Modes and Effects Analysis,” 5th International Forum on Research and Technologies for Society and Industry: Innovation to Shape the Future, RTSI 2019 - Proceedings. pp. 85–90, 2019. doi: 10.1109/RTSI.2019.8895587.

R. Venkataswamy, “Internet of things based metaheuristic reliability centered maintenance of distribution transformers,” IOP Conference Series: Earth and Environmental Science, vol. 463, no. 1. 2020. doi: 10.1088/1755-1315/463/1/012047.

DOI: http://dx.doi.org/10.24014/jti.v9i2.24160