Evaluasi Ergonomis Alat Angkut Cangkang Buah Sawit Berdasarkan Konsep Enase

Nofirza Nofirza, Supardi Supardi

Abstract


This research was the continuation of the earlier research which conducted to evaluate the design of palm fruit shells material handling using ENASE (Efisien “Efficient”, Nyaman “comfort”, Aman “Safe”, Sehat “Healthy”, Efektif “Effective”) concept. The data collected before and after the design processed for the standard time, heart beat rate, operator performance, and operator opinion from the questioners. The result showed the material handling designed made the system better than before. The Efficiency was showed by minimizing the working time (52,16%) and operator (50%). The Comfort gained by operator opinion that the handle is easy and comfort during the task. The Safety resulted from the using of wheel and tub which was appropriate with the worker and the conveyor. The Health was obtained from the reduce pain and suspended the fatigue from appears. While the Effective was accomplished from the standard output increasing (238%) which could sustain the productivity.
Keywords: effective, efficient, ENASE, material handling, cangkang buah sawit

Full Text:

PDF

References


A. Pawennari,, dkk. Analisis Ergonomi Terhadap Rancangan Fasilitas Kerja Pada Stasiun Kerja Dibagian Skiving Dengan Antropometri Orang Indonesia di Pabrik Vulkanisir Ban. Fakultas Teknologi Industri ITS Surabaya. 2007.

Asril, H, Peningkatan Kualitas Jasa Pelayanan Dengan Penerapan Quality Function Deployment (QFD). 2009.

Hartanto, S. Analisa Kualitas Pelayanan Perpustakaan Perguruan Tinggi dengan Metode Quality Function Deployment (QFD). 2008.

Liliana, Y. Pertimbangan Antropometri Pada Pendisainan. Seminar Nasional III SDM Teknologi Nuklir: Yogyakarta. 2007.

Nurmianto, E. Ergonomi, Konsep Dasar dan Aplikasinya. Guna Widya Jakarta. 2005.

Purnomo, H. Pengantar Teknik Industri. Graha Ilmu. Yogyakarta, 2004.

Sari, E. Analisis dan Perancangan Ulang Leaf Trolys yang Memenuhi Kaidah-Kaidah Ergonomi Studi Kasus di PTP. Nusantara VI Pabrik Teh Danau Kembar. Jurnal Teknik Industri Universitas Trisakti. 2011.

Simanjuntak, A.R. Evaluasi Kemampuan Fisik Berdasarkan Job Severity Index Guna Keselamatan Pekerja. Seminar Nasional Aplikasi Sains dan Teknologi. IST AKPRIND. Yogyakarta. 2008.

Santoso, G. Ergonomi Manusia, Peralatan dan Lingkungan. Prestasi Pustaka. Jakarta. 2004.

Tjiptono, F. D, A. Total Quality Management. Andi Offset. Yogyakarta. 2001.

Wignjosoebroto, Sritomo. Ergonomi, Studi Gerak dan Waktu. Guna Widya. Jakarta. 2008.

Wignjosoebroto, S. Perancangan Gerobak Sampah yang Ergonomis dengan Menggunakan Metode Kansei Engineering dan Metode Quality Function Deployment. Institut Teknologi Sepuluh Nopember (ITS) Surabaya. 2005.

Verry Sentosa , dkk. Aspek Ergonomi dalam Perbaikan Rancangan Fasilitas Pembuat Cetakan Pasir di PT X. Teknik Industri Universitas Tarumanagara .Jakarta. 2010.


Refbacks

  • There are currently no refbacks.


FAKULTAS SAINS DAN TEKNOLOGI
UIN SUSKA RIAU
Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sntiki@uin-suska.ac.id