Pendekatan QFD dalam Perancangan Alat Angkut Cangkang Buah Sawit yang Ergonomis

Nofirza Nofirza, Supardi Supardi

Abstract


The transfer of palm fruit shells from the storage space to the conveyor of chain grate stoker in PT. Sari Lembah Subur II was done manually using traditional cart and shovel. The unergonomic position of operator during this task, the repetitive motions and the difficulties of shells casting to the conveyor made this task having a high work load. This research aimed to produce an ergonomic material handling for palm fruit shells based on operator needed. With the Quality Function Deployment approach, the House of Quality of material handling specification needed was built. The design proceed has done with the combination of operator appropriate antropometric data.The result showed the designed of material handling can give a big contribute to minimized the problem persisted like the ergonomic position of operator during the task, the procces to handling the shells become more simple, no need additional tools, and also minimizing the operator.
Keywords: antropometric, chain grate stoker, ergonomic, material handling, QFD

Full Text:

PDF

References


Asril, H, Peningkatan Kualitas Jasa Pelayanan Dengan Penerapan Quality Function Deployment (QFD). 2009.

Hartanto, S. Analisa Kualitas Pelayanan Perpustakaan Perguruan Tinggi dengan Metode Quality Function Deployment (QFD). 2008.

Liliana, Y. Pertimbangan Antropometri Pada Pendisainan. Seminar Nasional III SDM Teknologi Nuklir: Yogyakarta. 2007.

Nurmianto, E. Ergonomi, Konsep Dasar dan Aplikasinya. Guna Widya Jakarta. 2005.

Purnomo, H. Pengantar Teknik Industri. Graha Ilmu. Yogyakarta, 2004.

Sari, E. Analisis dan Perancangan Ulang Leaf Trolys yang Memenuhi Kaidah-Kaidah Ergonomi Studi Kasus di PTP. Nusantara VI Pabrik Teh Danau Kembar. Jurnal Teknik Industri Universitas Trisakti. 2011.

Santoso, G. Ergonomi Manusia, Peralatan dan Lingkungan. Prestasi Pustaka. Jakarta. 2004.

Tjiptono, F. D, A. Total Quality Management. Andi Offset. Yogyakarta. 2001.

Wignjosoebroto, Sritomo. Ergonomi, Studi Gerak dan Waktu. Guna Widya. Jakarta. 2008.

Wignjosoebroto, S. Perancangan Gerobak Sampah yang Ergonomis dengan Menggunakan Metode Kansei Engineering dan Metode Quality Function Deployment. Institut Teknologi Sepuluh Nopember (ITS) Surabaya. 2005.

Verry Sentosa, dkk. Aspek Ergonomi dalam Perbaikan Rancangan Fasilitas Pembuat Cetakan Pasir di PT X. Teknik Industri Universitas Tarumanagara .Jakarta. 2010.


Refbacks

  • There are currently no refbacks.


FAKULTAS SAINS DAN TEKNOLOGI
UIN SUSKA RIAU
Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sntiki@uin-suska.ac.id