PERANCANGAN ULANG ALAT PERAJANG UBI KAYU DENGAN PENDEKATAN ERGONOMI (STUDI KASUS : BUAH TANGAN DUA BUNDA)

Neng Sri Novi Fitri Yani, Ardhan Suhendra

Abstract


Buah Tangan Dua Bunda is home industrial that produced typical food from west sumatera. They produced sanjai chips (cassava chips). Base on the questioner SNQ (Standard Nordic Questioner) toward 3 operators at chopper station shown that the significant muscle problems (MSDs) toward their right hand. The preliminary questioner shown that chopper toll is not good enough, especially for the safety. It can injure operators’ hand. So, in this research, the researcher try to redesign chopper tool to make the operators safety, comfort and reduce the risk of operators’ get muscle problems. The method that using to redesign are developing products, anthropometry, product/ design FMEA and REBA. Developing product method produced planning concept that suitable to the operators, such as; handle, chair (contain of second chair), and planning dimension is gotten by using measurement anthropometry. The chopper tool has width is 79,8 cm and high is 40,3cm. The handle has width is 11,2 cm and high is 57,6 cm. The handful diameter is 40,33 cm. Then chair dimension has width is 43,2 cm, length is 42,8 and high is 40,33 cm. The dimension of portable chair is 35 cm for width and high 23,3 cm. Next , prototype testing with FMEA produced the improvement priority toward the failure method with final result that has safe products and a good performance. The last testing is by using REBA method, prototype can reduce the score form not safety become safety.
Keywords: Anthropometry, Developing Product, Product/design FMEA (failure modes and effect analysis), REBA (Rapid Body Assasement), Tool design

Full Text:

PDF

References


Assouri, Sofjan, 1999, Manajemen Produksi dan Operasi, Lembaga Penerbitan Fakultas Ekonomi Universitas Indonesia, Jakarta.

E. Kenol, Joseph, 2010, The Basic Of FMEA, Review of Book, ASQ North Jersey.

Hidayat, Dedi, 2000. Prinsip-prinsip Fisika, Yudhistira, Jakarta.

Liliana, YP, dkk, 2007, “Pertimbangan Antropometri Pada Pendisainan”, Prosiding Seminar Nasional III SDM Teknologi NuklirYogyakarta.

Nannikar, A.A, dkk, 2012, “FMEA for Manufacturing and Assembly Process”, Prosiding International Conference on Technology and Business Management Mumbai.

Nurliah, Aah, 2012, Analisis Risiko Musculoskeletal Disorders (MSDs) Pada Operator Forklift di PT. LILI, Tesis, Fakultas Kesehatan Masyarakat, Universitas Indonesia.

Nurmianto, Eko, 2005, Ergonomi, Konsep Dasar dan Aplikasinya,Guna Widya, Jakarta.

Rami Hikmat, Fouad and Mukattash, Adnan, 2010, Statistical Process Control Tools: A Practical guide for Jordanian Industrial Organizations, Jordan Journal of Mechanical and Industrial Engineering.

Riduwan, 2005, Skala Pengukuran Variabel-Variabel Penelitian. Alfabeta, Bandung.

Sutalaksana, I, 1979,Teknik Tata Cara Kerja, Departemen Teknik Industri ITB, Bandung.

S. Hurts, Kenneth, 2006, Prinsip-prinsip Perancangan Teknik, Erlangga, Jakarta.

Tarwaka, 2010,Ergonomi Industri, Dasar-dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja, Harapan Press, Solo.

Wignjosoebroto, Sritomo, 2008,Ergonomi, Studi Gerak dan Waktu, Guna Widya, Jakarta.

Wijaya, Toni, 2011, Manajemen Kualitas Jasa, konsep Servqual, QFD dan kano, Indeks, Jakarta barat.


Refbacks

  • There are currently no refbacks.


FAKULTAS SAINS DAN TEKNOLOGI
UIN SUSKA RIAU

Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sntiki@uin-suska.ac.id