Perancangan Ulang Tata Letak Fasilitas Pada Sistem Produksi Flow Shop (Studi Kasus Pt. Xxx Pekanbaru)

Tengku Nurainun, Arif Sulistyawan

Abstract


A production facility design in flow shop production systems without considering the process flow may cause an ineffective production process flow. The complexity increases if the distance among facilities is too far so it decreases the effectiveness and efficiency during the production activities. This research proposed a plant layout design that has considered the production flow. The plant layout design applied u-shape flow pattern. In this proposal layout design the number of machines were added depending on the machine requirements. The distance of material displacement before the improvement was 21.5 meters, while the total distance of the proposed design was 19 meters.
Keywords: facility layout, flow shop production process, material flow

Full Text:

PDF

References


Assauri, Sofjan. “Manajemen Produksi dan Operasi”. Edisi Revisi halaman 119-123. LP-FEUI, Jakarta. 2008

Apple, James M. “Tata Letak Pabrik dan Pemindahan Bahan”. Edisi ke tiga, halaman 1, 154-156, 222-232, 279. ITB, Bandung. 1990.

Hadiguna, R. A, Heri Setiawan. “Tata Letak Pabrik”, halaman 33, 63-67, 77-78, 92-98. Andi, Yogyakarta. 2008.

Kusuma, Hendra. “Manajemen Produksi: Perencanaan & Pengendalian Produksi”, halaman 95-109. Penerbit Andi, Yogyakarta. 2009.

Nugroho, Rangga O. “Analisis Perancangan Ulang Tata Letak Fasilitas Produksi Pabrik Lama pada CV. Massitoh Catering Services”. [Online] Available http://repository.ipb. ac.id/7059/1/IMG. pdf. Jurnal Institut Pertanian Bogor, 2010. (Diakses 6 Januari 2013)

Purnomo, H., Perencanaan dan Perancangan Fasilitas, 2004, Penerbit Graha Ilmu, Yogyakarta.

Santy Sila.” Usulan Perbaikan Tata Letak Produksi Keripik Kentang Di Industri Kecil Menengah Bencok 26”. [Online] Available http://repository.gunadarma.ac.id/bitstream/123456789/5552/1/ Jurnal.pdf. Jurnal Universitas Gunadarma, 2012. (Diakses 17 Februari 2013)

Sutrisno Ong, Moses L. Singgih. “Perancangan tata letak dan investasi mesin produksi crank case di PT. TRI RATNA DIESEL untuk meningkatkan kapasitas produksi”. [Online] Available http://www.its.ac.id/personal/files/pub/3371-mosesiOng%20Sutrisno,Moses%20L%20Singgih.pdf .Jurnal Institut Teknologi Sepuluh Nopember, 2010. (Diakses 15 Februari 2013)

Wignjosoebroto, Sritomo, “Tata Letak Pabrik dan Pemindahan Bahan”. Edisi ke empat, halaman 67, 95-96, 133-140, 148-159, 196-197, 199-205, 269-271, 286-292. ITS, Surabaya. 2009.

Wignjosoebroto, Sritomo, “Ergonomi Studi Gerak dan Waktu”. Edisi pertama Cetakan ke tiga, halaman 131-137. ITS, Surabaya. 2009.

Winarti, “Usulan Perbaikan Tata Letak Fasilitas Pada Usaha Kecil Menengah Produsen Cover Jas”. [Online] Available http://repository.gunadarma.ac.id/bitstream/123456789/5552/1/Jurnal.pdf.Jurnal Universitas Gunadarma, 2009. (Diakses 15 Februari 2013)


Refbacks

  • There are currently no refbacks.


FAKULTAS SAINS DAN TEKNOLOGI
UIN SUSKA RIAU
Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sntiki@uin-suska.ac.id