Implementasi 5S dengan Merancang Sistem Informasi Visual pada Gudang di PT Surveyor Indonesia.

Nofirza Nofirza, Khairul Amri

Abstract


PT surveyor Indonesia's warehouse has a function as a storage of operating equipment, which is the placement was not set in the right place, dirty dan there was no visual information as a guide for searching and borrowing an equipment. This research aims to improve the layout of operating equipment at the warehouse used 5S method and make the process of borrowing and returning equipment is easily and quickly. On this research, 5S methods namely: sort (seiri), set in order (seiton), shine (seiso), standardize (siketsu) and sustain (shitsuke) equipped with visual information system design that produces 4 navigation menus. This research results a design of the operation equipment layout with a better organizing and produced a design of visual information, that provide information in the process of borrowing and saving back operation equipment at the warehouse. That information presented in its entirety, from borrower name, equipment availability, the amounts of borrowed and map for the equipment that would borrow in the form of photos.
Keywords: 5S, layout, visual information system, warehouse

Full Text:

PDF

References


Anugrahani, Martania “Penerapan dengan Menggunakan Menggunakan Metode Root Cause Analysis pada Departemen Packaging di PT. Multi Bintang Indonesia”. Tangerang. 2008.

Astuti, Dwi Ari dan Harahap, Pahlawansyah. “Analisis Pengaruh Penerapan Konsep 5 S (Seiri, Seiton, Seiso, Seiketsu , Shitsuke) dalam Upaya Untuk Meningkatkan Produktivitas Kerja Pada Karyawan Cv. Mubarokfood Cipta Delicia”. Kudus. 2012.

Hadiguna, Rika Ampuh “Manajemen Pabrik: Pendekatan Sistem untuk Efisiensi dan Efektifitas”. Edisi 1, halaman 116 – 119. Bumi Aksara, Jakarta. 2009.

Kurniawan, Ivan. “Perbaikan Tata Letak Gudang pada PR. Sukun Sigaret Menggunakan Metode Shared Storage”. PR. Sukun Sigaret. Indonesia. 2014.

Listiani, Teni. “Penerapan Konsep Dalam Upaya Menciptakan Lingkungan Kerja yang Ergonomis di Stia Lan Bandung”. Stia Lan Bandung. 2010.

Rimawan, Erry dan Sutomo, Eko. “Analisa Penerapan 5S+Safety pada Area Warehouse di PT. Multifilling Mitra Indonesia”. Indonesia. 2012.

Simanjuntak, A. Risma dan Hernita, Dian. “Usulan Perbaikan Metode Kerja Berdasarkan Micromotion Study dan Penerapan Metode 5S untuk Meningkatkan Produktifitas”. Indonesia. 2008

Osada, Takashi. “Sikap Kerja 5S: Seiri Pemilahan, Seiton Penataan, Seiso Pembersihan, Seiketsu Pemantapan, Shitsuke Pembiasaan”. Terjemahan Dra. Mariani Gandamihardja. Edisi 5, PPM, Jakarta. 2004.

Yudhaningsih, Resi. “Peningkatan Efektivitas Kerja Melalui Komitmen Perubahan dan Budaya Organisasi Politeknik Negeri”. Semarang. 2011


Refbacks

  • There are currently no refbacks.


FAKULTAS SAINS DAN TEKNOLOGI
UIN SUSKA RIAU

Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sntiki@uin-suska.ac.id