KEANDALAN SISTEM INTRUMENTASI PLTG DI PT. PLN TELUK LEMBU PEKANBARU

Poppy Dewi Lestari, Rino Eldika

Abstract


PT. PLN PLTD / G Teluk Lembu is one company engaged in power generation, which in its operations using equipment that has been integrated with each other and have a system of instrumentation for each controller. Great ability of this instrumentation was also followed by the risk of loss of power in the event of failure of electricity distribution. This is certainly not desired by PT. PLN, because of the failure resulted in loss of income and opportunity. Therefore PT. PLN implement instrumentation system on Power Plant Gas (PLTG) that can provide controlled so as to boost the reliability.

                Reliability is one important performance parameter for the reliability prediction results can be used to determine the choice to use an instrumentation and its implementation at a power plant . Reliability parameters of a generator includes the availability (availability), system downtime and Mean Time To Failure (MTTF) or the lifetime prediction of a network. By analyzing the above parameters obtained power plant instrumentation system availability levels in the PT. PLN PLTD / G Teluk Lembu is greater than 99.99%. Level of availability (availability) has gained an average of 99.99873259%, with a value of 6.66150696 system downtime minutes per year, and Mean Time To Failure (MTTF) is 69.98554999 years.

                With the calculation results in It can be concluded that the power plant instrumentation system on PT. PLN to meet the requirements that have been standardized for industrial processes.

 

Key Words: Availability, Down Time System, Instrumentation PLTG, reliability  and MTTF


Full Text:

PDF

References


Gunawan, Arief Hamdani dan Franky Ferdinand. 2002. “Kajian Kehandalan SDH pada JARLOKAF”,Elektronika Indonesia, no. 44, Thn IX.

Habdbook PT. PLN PLTD/G Teluk Lembu Pekanbaru

Henley, E.J. dan Hiromitsu Kumamoto, 1992. “Probabilistic Risk Assesment”, ”reliability engineering, Design and Analysis”, Halaman 20-50, New York, IEEE Press.

Ramakumar, R. 1993. “Engineering Reliability”,“Fundamentals and Aplications”,Halaman 50-112, New Jersey, Englewood Cliffs.

Waradiba, Safarina (2007), Analisis Reliability Instrument Menggunakan Metode Failure Modes And Effect Analysis (FMEA) pada Boiler Feed Pump Turbin (BFPT) Untuk Memperbaiki Kinerja Terencana di PT. IPMOMI. Laporan Skripsi, ITS, Surabaya.


Refbacks

  • There are currently no refbacks.


FAKULTAS SAINS DAN TEKNOLOGI
UIN SUSKA RIAU

Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sntiki@uin-suska.ac.id